Ultra-compact and incredibly convenient, the TASCAM DR-10L is a digital recorder/lavalier microphone combo. The included wired lavalier microphone is affixed via a ⅛" screw-down lock connector for added flexibility, and is compatible with most Sennheiser lavalier mics and other mics with a compatible connector.

It's designed especially for both creative filmmakers and the busy videographers, making for an immensely powerful problem-solving tool, and delivering professional sonics and remarkable convenience.

Great for location recording, this system can be mounted to each on-camera actor (additional systems sold separately), eliminating the need for booms, wires, or expensive (and unpredictable) wireless systems. Ideal for live events, a unit can be worn by each and every member of even the largest wedding party to ensure that every last word is captured (additional systems sold separately). The combination of a portable, high-quality digital recorder matched with a tiny, professionally-spec'd microphone makes the DR-10L an inspiring tool for experimental audio designers as well.

• DR-10L Ultra-portable Digital Stereo Audio Recorder unit
• Lavalier microphone with microphone clip and windscreen
• USB cable
• Carrying case
• Belt Clip
• Owner's Manual (including warranty)

• 44.1kHz/48kHz, 16-/24-bit linear PCM mono/poly recording
• Supports WAV format (compatible with BWF format)
• Media: micro SD/SDHC cards (supports 32GB capacities)
• Lavalier microphone with microphone clip and windscreen included (cable length: 160cm)
• Sliding record switch and hold function to prevent misoperation during recording

• Mic Input: Lavalier ⅛" screw-down connector (Sennheiser format)
• Included Microphone: Lavalier, omni pattern
• Recording Media: microSD/SDHC card
• Recording Format: WAV/BWAV file
• Recording Resolution: 44.1/48kHz, 16- or 24-bit
• Dual Recording: Yes
• Limiter: Yes
• Audio Out: ⅛" stereo headphone jack
• Display: High-contrast OLED
• Power: 1 AAA battery or USB power
• Mounting Hardware: Built-in Belt Clip
• Recording media:
  • microSD card (64MB to 2GB)
  • microSDHC card (4GB to 32GB)
• Recording format: WAV(BWF)
  • Sampling frequency: 44.1kHz, 48kHz
  • Quantization bit rate: 16-/24-bit
• Analog audio Inputs:
  • Connector: 1/8” (3.5mm) mini TRS JACK with screw-down lock
  • MIC input gain: LOW / MID LOW / MID / HIGH / HIGH+
  • Maximum input sound pressure: 115dB SPL
  • Maximum input level: -15dBu (Gain L)
  • Minimum input level: -55dBu (Gain H+)
  • Mic input gain: +14dB to +38dB
  • Input impedance: 33kΩ (mic bias off) / 2kΩ (mic bias on)
• Phones Connector: ⅛" (3.5mm) stereo mini jack
• USB:
  • Connector: Micro-B type 4-pin
  • Protocol: USB2.0 HIGH SPEED mass storage class
• Power: 1 AAA battery (Alkaline battery/Ni-MH battery/ Lithium battery), USB bus power
• Power consumption: 0.45W
• Battery operation time, WAV, 24-bit / 48kHz Rec, without headphones, limiter: OFF, Dual Rec: OFF, JEITA Rec:
  • Alkaline battery (EVOLTA): Approx 10 hours
  • Ni-MH battery (eneloop): Approx 8 hours
  • lithium battery (Energizer ULTIMATE LITHIUM): Approx 15.5 hours
  • Battery (RTC): Lithium x 1 (built-in with soldering)
• Dimensions (W x H x D): 2.0" x 2.2" x 1.0" (52 x 55.6 x 24.4mm)
• Weight:
  • Including Battery: 2.2oz. (63g)
  • Without Battery: 1.79oz. (51g)
• Operating temperature: 0°C to 40°C
• Audio Performance:
  • Frequency response: 20Hz - 22kHz +1/-2dB (IN to PHONES)
  • Distortion: 0.05% (1kHz sine wave, @ maximum input level)
  • S/N Ratio: 88dB or higher (phones volume max, mic gain L selected)
  • Maximum input level: -15dBu (Gain L)
  • Minimum input level: -55dBu (Gain H+)
  • Mic input gain: +14dB to +38dB
• Lavalier Microphone Performance:
  • Microphone Sensitivity: -42dBV/Pa
  • Pickup pattern: Omni
  • Maximum input sound pressure: 115dB SPL
  • Cable Length: 63" (160cm)