This Listing Is For a Brand New OSP 3 Space 14" Deep ATA Effects Rack Flight Road Case & JG9 Power Conditioner 9 Outlet
The OSP rack cases feature 1/4" plywood with
black laminate, ball corners, Industrial twist-lock latches, Industrial spring loaded
handles, front and back rack rails, tongue and groove metal railing and rubber feet.
OSP ATA cases will fit any standard 19" rack mountable gear. OSP cases are
road ready and are built to last.
Comes with a FREE
small bag of rack screws and washers.
FEATURES
- 1/4"
plywood w/black laminate
- Tongue
& groove metal railing
- Ball
corners
- Industrial
rivets
- Industrial
latches
- Rubber
feet
- Pop-up handle on lid
- Heavy-duty
pre-tapped rack rails
- Rack
rails are 19" wide and 12" apart front-back
- Front
and rear rack rails (5.25" tall) (Recessed 1" from ea edge)
- 14"
deep when lids are off
- Free
small bag of rack screws and washers
Dimensions with rubber feet on
Lids Off - 21" W x 7" H x 14" D
Lids On - 21" W x 7" H x 20" D (Each Lid
provides 2-1/2" of inside usable space)
Weight - 19 lbs
Juice Goose JG9 - 9 Outlets Power Conditioner
The Juice
Goose JG 9 features a full 7 inch deep rack mounted chassis with an illuminated
power switch, current overload protection, one unswitched outlet on the front
and 8 outlets on the back, rotated 90 degrees to better accommodate "wall
wart" power supplies. Fifteen amps of power in a black steel chassis.
Includes basic AC line conditioning and spike protection.
JG SERIES (For Basic Requirements)
The JG Series family of power and light modules includes
five high quality, economical models that are valuable accessories for any
rack-mounted system. The switched outlets on the back of each unit provide
power while the discreet components inside provide a basic level of protection
to help clean up dirty and dangerous AC voltage.
The Basic power conditioning includes a fast-acting metal
oxide varistor (MOV) installed to clamp voltage spikes running between the
incoming line and neutral leads. This level of conditioning also includes a
capacitor to reduce the level of AC line interference that may be transmitted
between the line and neutral leads.