Multi-radius - 12" at the nut and 16" at the 22nd fret for vastly superior comfort
Coil tapping on neck and bridge pickup via push-pull tone knob
3/4" solid thick, maple cap improves overall sound quality (increases brightness of the guitar)
Maple cap sits over the 1 1/2” solid mahogany body
Bound body, neck, and headstock (triple binding on the body; single binding on the neck and headstock)
Improved nickel plate hardware, including nickel die-cast Grover tuners with 18-1 turning ratio for ultra fine tuning (Model 102-18N)
Graph Tech NVS2 bridge with string saver saddles
Two Type V Alnico humbucker pickups create that warm, traditional sound (humbucker pickups help reduce hum and noise and offer superior performance by giving a thicker fuller sound than single coils; humbuckers also create a much larger magnetic field, which helps eliminate dead spots and increases overall power of the pickup)
Two volume controls, two tone controls, and a 3-way pickup selector switch allow a wide range of expressive control
Adjustable truss rod in neck to offset alterations caused by changes in humidity, temperature, or new strings
Ebony fretboard with 22 jumbo frets and genuine mother of pearl trapezoid inlays
High voltage, brass shaft pots for reduced noise and an improved pickup selector switch
Individually hand filed frets for professional feel and playability
D'addario 10-46 strings installed at the factory along with a professionally cut Graph Tech Tusq BT-6643-00 nut
Stop-bar tailpiece transfers string vibration to the body of the guitar and produces superior sustain
Specifications:
Overall length: 40"
Scale length: 24 3/4"
Width of the neck at the nut: 1 11/16" (42.8 mm)
Width of the neck at the 21st fret: 2 3/16" (56 mm)
Spacing between the strings at the nut: 1/4" (7 1/2 mm)
Spacing between the strings at the bridge: 3/8" (10 mm)
Overall string spacing at the nut: 36 mm
Overall string spacing at the bridge: 52 1/2 mm
Neck taper/thickness at the 1st fret: 3/4" (19 1/2 mm)
Neck taper/thickness at the 12th fret: 7/8" (21 1/2 mm)
Width at the upper bout: 9 1/4"
Width at the lower bout: 13 5/16"
Body thickness at the edge: 1 15/16"
Weight: only 10 pounds
Coil tapping on neck and bridge pickup via push-pull tone knob
3/4" solid thick, maple cap improves overall sound quality (increases brightness of the guitar)
Maple cap sits over the 1 1/2” solid mahogany body
Bound body, neck, and headstock (triple binding on the body; single binding on the neck and headstock)
Improved nickel plate hardware, including nickel die-cast Grover tuners with 18-1 turning ratio for ultra fine tuning (Model 102-18N)
Graph Tech NVS2 bridge with string saver saddles
Two Type V Alnico humbucker pickups create that warm, traditional sound (humbucker pickups help reduce hum and noise and offer superior performance by giving a thicker fuller sound than single coils; humbuckers also create a much larger magnetic field, which helps eliminate dead spots and increases overall power of the pickup)
Two volume controls, two tone controls, and a 3-way pickup selector switch allow a wide range of expressive control
Adjustable truss rod in neck to offset alterations caused by changes in humidity, temperature, or new strings
Ebony fretboard with 22 jumbo frets and genuine mother of pearl trapezoid inlays
High voltage, brass shaft pots for reduced noise and an improved pickup selector switch
Individually hand filed frets for professional feel and playability
D'addario 10-46 strings installed at the factory along with a professionally cut Graph Tech Tusq BT-6643-00 nut
Stop-bar tailpiece transfers string vibration to the body of the guitar and produces superior sustain
Want to add a case with your guitar? Bundle this casewith your order with no extra shipping charges and guitar will ship to in theprotective case. Just be sure to put the guitar and case inyour shopping cart at the same time to receive this discount.
https://reverb.com/item/1930215-douglas-egc-400-lp-bk-burgandy-case-for-gibson-epiphone-les-paul
Specifications:
Overall length: 40"
Scale length: 24 3/4"
Width of the neck at the nut: 1 11/16" (42.8 mm)
Width of the neck at the 21st fret: 2 3/16" (56 mm)
Spacing between the strings at the nut: 1/4" (7 1/2 mm)
Spacing between the strings at the bridge: 3/8" (10 mm)
Overall string spacing at the nut: 36 mm
Overall string spacing at the bridge: 52 1/2 mm
Neck taper/thickness at the 1st fret: 3/4" (19 1/2 mm)
Neck taper/thickness at the 12th fret: 7/8" (21 1/2 mm)
Width at the upper bout: 9 1/4"
Width at the lower bout: 13 5/16"
Body thickness at the edge: 1 15/16"
Weight: only 10 pounds
Condition | Brand New (New) Brand New items are sold by an authorized dealer or original builder and include all original packaging.Learn more |
Brand | |
Model |
|
Categories |