Music Thing Modular // Spring Reverb MKII Eurorack Module + Expander + 2Spring Tanks + Digital Brick

Music Thing Modular //

• Spring Reverb MKII 
• MKII Expander
• Eurorack Power Cable
• Digital Reverb Brick
• Spring Tank M inkl RCA (cinch) cable

• Optional lege ich gerne einen SpringTank in L hinzu, hier ist eine Feder gerissen, funktioniert trotzdem noch. 
• As an option I could pack a Spring Tank L - one spring is missing, but its still working

Description (english below):

Ich verkaufe hier einen Spring Reverb von Music Thing Modular. Ca 1 Jahr alt und in sehr gutem Zustand und funktioniert zu 100% und absolut zuverlässig! Das Modul ist 6HP breit und wird mit dem 3HP breiten Expander vervollständigt. Ein Accutronics Spring Tank (M) und eine digitaler Reverb brick (M) sind ebenfalls vorhanden, so lässt sich der Hall zwischen Digital Brick und Rverbtank stufenlos blenden!
Bei Bedarf packe ich den Spring Tank L hinzu.
Die Bricks oder Tanks können natürlich ganz einfach getauscht werden, digitale Bricks erhält man zB bei MusikDing oder Thonk, Tanks auch in Musikgeschäften. Neupreis für alles als Thonk DIY Kit: ca 220€ (180€ ohne Tank L)

• 75 mA +12V
• 25 mA -12V

The Music Thing Spring Reverb Mkii is a flexible, easy-to-build voltage controlled DIY mono spring reverb module. Traditional guitar reverbs are tuned to the sound of the guitar and the amplifier it is played through. This circuit is different; designed to be relatively clean and high-fi, with a lot of bass response. Use real spring reverb tanks, or solid state reverb bricks.

The Music Thing Spring Reverb Expander is designed to connect to the . The expander adds the ability to blend the reverb tank and brick outputs and manually crossfade between the two. This module also adds the option to connect to your reverb tank from the front panel rather than the back PCB of the main Spring Reverb module. This expander is passive so doesn’t require a power cable.

• Internal Feedback control with CV input, dedicated attenuverter and with invert switch for maximum feedbackiness
• Wet out and feedback in sockets for more flexible patching
• The Expander allows for instant switching between reverb brick and spring tank – or set a blend between the two
• Expander with Front panel mount Phono sockets & Crossfade between reverb types.
• Works with a variety of spring reverb tanks (optional), or with the Accutronics BTDR-2 reverb ‘brick’ designed by Brian Neunaber (optional)
• Vactrol (VTL5C3) crossfade between dry and wet (vactrol circuits are variable in their ability to go completely 100% wet, like the Make Noise Echophon for example)
• Tilt EQ on the reverb send to tune the voice of the reverb
• X-Fade input so the module can also be used as a standalone vactrol crossfader
• Feedback circuit with positive and negative phase
• Attenuverter on the crossfade CV input

ACCUTRONICS Spring Tank

• Springs: 3
• Delay Type: Medium
• Tank Dimensions: 23.5 x 8.5 x 3.3cm
• Input Impedance: 800 Ohms
• Output Impedance: 2575 Ohms
• Mounting: Horizontal Open Side Down
• Connectors: Input Insulated – Output Grounded

Large – 9EB2C1B

• Springs: 3
• Delay Type: Medium
• Tank Dimensions: 42.5 x 12 x 3.3cm
• Input Impedance: 800 Ohms
• Output Impedance: 2575 Ohms
• Mounting: Horizontal Open Side Down
• Connectors: Input Insulated – Output Grounded

BELTON BTDR-2H DIGITAL REVERB BRICK

• Decay Time 2,5s