Diamond Pickup surrounds replacement for Epiphone ET270 Aria 1202T 1802T 1803T (Set of 2)

Two pickup surround (neck & bridge) for '70 MIJ guitars of many brands from Epiphone ET270 models, Aria 1802T or 1803T,  1202T or pro II and few jazz box models, etc...
Many of those rings has started to rot, thus you may be looking for a replacement solution. I offer replacement covers set made in black or white ABS plastic which is very resistant. Other colors are possible on request...

As they're made from my 3D printer, so the raw result from the printer need some work to be clean. I will do some of the sanding process (mainly smoothing the staggered radius from printer on the top to smooth regular radius). Then, you'll have to finish the sanding and polish stages. I will do 30 mins of the work/cover to have a decent result (sanding papers grain from 120 then some paper around 300) but you will have to do the rest 600 and >1000 + car polish for a nice finish, depending on your expectations (some of you will not spend more than 10 mins and seems happy with the result, some others spent 1 hour and have shinny result without printer's layers aspect).

It's very small production line ... few units per year and each one requires manual intervention (half an hour to sand @80 then @120 for the sides and radius top)... that's why the set is quite $$$.

Pictures 2-4 = what you have
Pictures 5-6 = what you will have after the two stages of sanding and polish
Picture 7 = also available in white 

Message me if you need a trio for your 3 pickups guitar like the 1803T, I will send you an offer for 3.

You may need the other part of the pickup which are the top radius covers : https://reverb.com/fr/item/68667734-diamond-pickup-surrounds-top-replacement-for-epiphone-et270-aria-1202t-1802t-1803t

In case you need top covers + housings I will take only one shipment, so please message me for a custom packaged offer.