Mark Levinson No. 436 Mono Amplifier Pair - Low Hours

Here's a rare chance to own a pair of pristine Levinson No. 436 Mono Amps for nearly half of what they sold for originally. Reviews across the board for these all conclude that they are without question among the best amps there are out there. This set is low-hours, single owner, and pristine. Both amps work flawlessly.

These will be professionally packed, fully insured, and shipped freight. We have shipped many high-end mono amps successfully, so buy with confidence. And of course, please feel free to contact me if you have any questions!

Manufacturer Notes:

Description: Solid-state monoblock power amplifier with one pair Madrigal speaker binding posts, one 3-pin XLR balanced input, two 1/8" minijacks for remote turn-on, one RS-232 port on RJ-11, two Mark Levinson communication ports on RJ-45, and two PHAST communications ports on RJ-45. Rated power output (20Hz-20kHz, <0.3%. THD, FTC): 350Wpc into 8 ohms (25.4dBW), 700W minimum continuous into 4 ohms (25.4dBW), 1400W minimum continuous RMS power at 2 ohms (25.4dBW). Frequency response: 20Hz-20kHz, ±0.2dB. Output impedance: ±0.05 ohm, 20Hz-20kHz. S/N Ratio: better than -89dB (ref. 2.83V). Damping factor: >800, 20Hz-20kHz into 8 ohms. Power consumption: 100W in standby, 180W at idle. Current draw at rated output at 120V: 8.5A (350W into 8 ohms), 14.6A (700W into 4 ohms), 25.6A (1400W into 2 ohms).
Dimensions: 17.75" (455mm) W by 7.65" (194mm) H by 20.2" (518mm) D. Weight: 85 lbs (38.6kg) net, 95 lbs (43.2kg) shipping.
Serial numbers of units reviewed: 1001, 1002.
MSRP: $6250 each, $12,500/pair. Approximate number of dealers: 85.
Manufacturer: Harman Specialty Group, 3 Oak Park, Bedford, MA 01730.