HEMPOPOTAMUS FISH TANK SPEAKER KEVLAR WOOFERS WITH RUBBER SURROUND WITH GRAVEL PUMP AND BUBBLER 1

*****PLEASE SEEE MY OTHER LISTINGS!!!*****

  Here's something a little different....

  'At PMR, we are starting to fabricate these 10x10x18"  extension speaker enclosures... uhhh tanks....

  call them what you want, but these are an acrylic transparent tank, which sorta;' looks like the speaker is 'under water'.

  There are two chambers- the front volume for the speaker itself, and the rear volume for your fish. This is the first prototype built, so I am offering it for a little less cost . 

 A new  pump is included, as well as around 15 feet of hose, bubbler stone,  and a check valve ......I'll also include all of the stone/plants, and inside decorations as shown.

Here's some speaker info:
 These things HIT when you slap the power to them....

The cool thing is- these HAVE the crossovers included, and they aren't some cheap XXX electrolytic, these are a full 12dB/ oct. on BOTH slopes, and actually use a mylar on the tweeter!

   These are the superior yellow  KEVLAR cone/ butylene surround models, NOT the other black models....

 8 ohms  100 watts RMS /200 MUSIC PROGRAM conservatively .SMOOOOTH under 60Hz to  over 20 KHz.....4 pounds each

Woofers- 5 1/4" KEVLAR woven stiff cones with butylene rubber surrounds

 Tweeters-  1" aluminum deep dome "eyeball" wide dispersion tweeters

Crossovers- 12dB/oct. w./ mylar capacitor in tweeters signal path.Protective inductor in parallel with tweeter

 Woofers have series pass inductors with absorptive capacitors.
 -3/0/+3dB selectable tweeter response switch surface mounted

Sound-wise, these have a beautifully dry,, dampened sort of tonality, similar to many high end near field monitor designs, yet can fill a large room with high quality, high fidelity high volume  sound

Paintable metal grille will be included, , you can change the color to what ever you want....

....The grilles are metal and held on with neodymium magnets in the black rubberized acrylic plate plate..

I'll also include a piece of sheet styrofoam rot sit it on.

 The 6 foot speaker wire out of the back will come with pre-soldered ends.

.... If you want a certain type of connector soldered on, just let me know.. 1/8" for cell phones... 1/4' for other amps.... phono, I can provide most ends required.

Welp, that pretty much wraps it up...

 If you want a conversation piece for the living room center channel of the surround system,.......... if you need an extension speaker for the kitchen counter top,........... or if you just want a cool piece to sit on the desk at the office, so you can play music while relaxing to the view of your favorite fish, then here ya' go!!

 ANY questions or concerns, just ask.

 Thanks -

- Jason/ PMR