Martin Audio F10 Black

This is for a lightly used set of speakers and brand new stands. The specs are listed below and I’m selling them for less than half the price of a single cabinet for both. Consider the stands free!

Architectural and engineering specifications:

The loudspeaker system shall be of the two-way passive type consisting of one 10" (250mm)/2.5” (63.5mm) voice coil direct radiating reflex loaded low frequency transducer and one 1" (25mm) exit HF compression driver mounted on a user rotatable constant directivity horn in a multi-angled enclosure. The enclosure shall be of a multi-laminate birch ply construction with integral pole mount and threaded inserts for wall and ceiling mounting. Low and high frequency sections shall be integrated by an internal 2.5kHz passive crossover network.
Performance of the loudspeaker system with its electronic controller shall meet or exceed the following criteria:
Frequency response measured 1 metre on axis shall be 65Hz-20kHz ±3dB.
High frequency dispersion at -6dB points shall be 90°H x 50°V.
Power handling shall be 300W AES, 1200W peak. Rated impedance shall be 8 ohms.
Maximum SPL calculated at 1 metre on axis shall be 121dB continuous, 127dB peak.
Dimensions (W) 351mm x (H) 500mm x (D) 317mm (13.8ins x 19.7ins x 12.5ins).
Weight 17kg (37lbs).
The loudspeaker system shall be the Martin Audio F10+.

Compact, two-way passive
FREQUENCY RESPONSE: 65Hz-20kHz ± 3dB
-10dB @ 56Hz
DRIVERS: 10” (250mm)/2.5” (63.5mm) voice coil LF driver 1” (25mm) exit HF compression driver
RATED POWER: 300W AES, 1200W peak 8 ohms
DISPERSION: 90 ̊ horizontal, 50 ̊ vertical
CROSSOVER: 2.5 kHz passive
ENCLOSURE: 27.7 litre, multi-laminate birch ply Textured black paint
Black perforated steel
PIN CONNECTIONS FITTINGS: 2 x Neutrik NL4
FR+,- : 1+,1-, Link thro’: 2+,2-
10 x M8, 4 x M8 threaded inserts
1 x mounting pole socket
1 x pocket handle
DIMENSIONS: W) 351mm x (H) 500mm x (D) 317mm (W) 13.8ins x (H) 19.7ins x (D) 12.5ins WEIGHT: 17kg (37lbs)