Shure QLXD14/85 Lavalier Wireless Microphone System, H50/534-598MHz, Includes QLXD1 Bodypack Transmitter, QLXD4 Receiver, WL185 Lavalier Condenser Mic

Featuring the WL185 lavalier microphone, QLXD1 & 4/85 (H50/534-598MHz) combines professional features with simplified setup and operation. The Shure QLXD4 is a half-rack digital wireless receiver. Ideal for presentation spaces, music venues and houses of worship, the QLXD4 combines professional features with streamlined setup and operation. Automatic scanning quickly finds open frequencies and one-touch sync quickly deploys them to transmitters. Ethernet networking enables networked channel scanning across multiple receivers and Wireless Workbench software integration for remote control of receiver settings from a PC or Mac. The Shure QLXD1 bodypack transmitter is ideal for wireless vocals and instruments in presentation spaces, music venues and houses of worship. Easy to use, the QLXD1 quickly syncs with a wireless receiver over IR at the push of a button and maintains clear, uninterrupted signal over its entire 100 m (330 ft.) range. All metal construction ensures durability and a wide selection of compatible microphone choices offer legendary Shure sound signatures. The Shure WL185 is a Cardioid lavalier electret condenser microphones for use with a wireless bodypack transmitter. Each micro-phone has a 1.2m (4') cable terminated with a miniature 4-pin con-nector (TA4F). The furnished tie clip can be rotated in 90deg. intervals for placement flexibility. General purpose sound reinforcement applications requiring good rejection of ambient noise. Use of windscreen highly recommended. Pickup angle is 130deg.. Includes: Shure QLXD1 Bodypack Transmitter (H50/534-598MHz) - QLXD4 Digital Wireless Receiver (H50/534-598MHz) - WL185 Lavalier Microphone - Instrument Cable - Power Supply - 2 x AA Batteries - Two 1/2 Wave Antennas - 2 x BNC Cables - Zipper Bag - 2 x BNC Bulkhead Adapters - Rackmount Kit - User Guide - Shure Warranty Features: QLXD1: 20 Hz to 20 kHz frequency range with flat response (actual response is microphone dependent) QLXD1: Over 120 dB of dynamic range - no transmitter gain adjustments needed QLXD1: AES 256-bit encryption for secure transmission QLXD1: Up to 9 hours continuous use with 2 x AA alkaline batteries QLXD1: Optional Shure SB900 lithium ion rechargeable battery provides up to 10 hours of QLXD1: Backlit LCD with easy to navigate menu and controls QLXD1: 100 meter (300 feet) line-of-sight operating range QLXD1: 4-Pin male mini connector (TA4M) QLXD1: Rugged metal construction QLXD1: Frequency and power lockout QLXD4: 64 MHz tuning bandwidth (region dependent) QLXD4: More than 60 preset compatible channels per frequency band (region dependent) QLXD4: Up to 17 compatible systems per 6 MHz TV channel; 22 systems per 8 MHz channel QLXD4: Digital predictive switching diversity ensures solid RF connection QLXD4: IR sync deploys selected frequency to transmitter QLXD4: Ethernet networking provides streamlined setup across multiple receivers QLXD4: Networked channel scan configures open frequencies for all connected receivers QLXD4: AES 256-bit encryption for secure wireless transmission QLXD4: Up to 60 dB of adjustable audio gain QLXD4: Audio and RF LED meters with peak indicator QLXD4: Detachable 1/2 wave antennas QLXD4: Mic / line switchable XLR output QLXD4: 1/4 instrument output QLXD4: Durable aluminum construction with brushed finish QLXD4: Compatible with Shure Wireless Workbench 6 control software Specifications: Frequency Range: H50/534-598MHz QLXD1: Mic Offset Range: 0 to 21 dB (in 3 dB steps) QLXD1: Battery Type: Shure SB900 Rechargeable Li-Ion or AA batteries 1.5 V QLXD1: Battery Runtime: at 10 mW QLXD1: Shure SB900: up to 10 hours: Alkaline: up to 9 hours QLXD1: Housing: Cast aluminum QLXD1: Audio Input Connector: 4-pin male mini connector (TA4M) QLXD1: Configuration: Unbalanced QLXD1: Audio Input Impedance: 1 mOhms QLXD1: Maximum Input Level: 1 kHz at 1% THD QLXD1: 8.5 dBV (7.5 Vpp): Preamplifier Equivalent Input Noise (EIN) QLXD1: System Gain Setting = +20: -120 dBV, A-weighted, typical QLXD1: RF Output Connector: SMA QLXD1: Antenna Type: 1/4 wave QLXD1: RF Output Impedance: 50 Ohms QLXD1: Occupied Bandwidth: <200 kHz QLXD1: Modulation Type: Shure proprietary digital QLXD1: Power: 1 mW or 10 mW QLXD4: Spurious Rejection: >80 dB, typical QLXD4: Connector Type: BNC QLXD4: RF Output Impedance: 50 Ohms QLXD4: Gain Adjustment Range: -18 to +42 dB in 1 dB steps QLXD4: Configuration: 1/4 (6.35mm): Impedance balanced (Tip=audio, Ring=no audio, Sleeve=ground) XLR: Balanced (1=ground, 2=audio /+, 3=audio-) QLXD4: Audio Input Impedance: 1/4 (6.35 mm): 100 Ohms (50 Ohms Unbalanced) XLR: 100 Ohms QLXD4: Full Scale Output: 1/4 (6.35 mm): +12 dBV XLR: LINE setting= +18 dBV, MIC setting= -12 dBV QLXD4: Mic/Line Switch: 30 dB pad QLXD4: Phantom Power Protection: 1/4 (6.35 mm): Yes XLR: Yes QLXD4: Network Interface: Single Port Ethernet 10/100 Mbps QLXD4: Network Addressing Capability: DHCP or Manual IP address QLXD4: Maximum Ethernet Cable Length: 100 m (328 ft) QLXD4: Housing: Steel QLXD4: Power requirements: 12 V DC at 0.4 A, supplied by external power supply (tip positive) WL185: Type: Condenser (electret bias) WL185: Frequency Response: 50 to 17,000 Hz WL185: Polar Patterns (at 1 kHz): Cardioid WL185: Output Impedance: 1800 Ohms WL185: Sensitivity: (1 Pa = 94 dB SPL): -45.5 dBV/Pa WL185: Maximum SPL: 130.5 dB SPL WL185: Output Noise: 28.0 dB SPL WL185: Dynamic Range: 102.5 dB WL185: Polarity: Positive pressure on diaphragm produces positive voltage on pins 3 and 4 relative to pin 1 WL185: Power Requirements: Regulated nominal +5 Vdc (1.5 Vdc to 10 Vdc) provided at microphone connector pin 2 relative to pin 1 of a Shure wireless microphone transmitter Dimensions (H x W x D): QLXD1: 86 x 65 x 23mm (3.38 x 2.57 x 0.92 ) QLXD4: 41 x 197 x 151mm (1.63 x 7.75 x 5.94 ) Weight: QLXD1: without Batteries: 138g (4.9oz) QLXD4: Without Antennas: 777g (27.40oz)