In SWITCHER mode Infusor-X lets you jump between your
effects modules on the fly – in timing w/ your groove. Plug in a
signal on channel 1. And get back
7 (active) buffered multiples of that signal. Now send those
signals to 7 of your favorite effects. And patch
your 7 effects returns into channels 2-8. Use the
Channel Select buttons to switch between the dry channel 1, and the 7 effects
return channels. Whatever
channel you select, it will go to the output one-at-a-time. Also, plug
in an external 0-5v control voltage to automate switching between the channels. The CV switching
breakpoints are user-programmable.
In MIXER mode, the Infusor-X becomes a straightforward 10-Channel Audio Sub-Mixer.
Both modes
feature: 8 level
sliders (-inf to +3dB gain), 8 mute /
channel select buttons, 8 pan pots. A pair of
auxiliary L/R inputs on channels 9/10. Just for
your favorite synth or drum machine. And a stereo
output.
Infusor-X is destined to groove you.
Please note: Infusor-X uses a 16-pin power
header + requires 5V from your Eurorack power supply. A 15cm
16-to-16 pin ribbon cable is included. Each module
is crafted by hand in limited quantities, and tested for quality assurance.
Specs:
22HP (111mm)
Module width
22mm Module depth
19mA on +12V
19mA on -12V
7ma on 5V