2) Mackie MR824 8” Studio Monitors+10" Active Sub+Mic+Mount+36" Stands+Pads

Package Includes:

• (2) Mackie MR824 8” 170 Watt Powered Active Studio Monitors Class A/B Bi-Amped Speaker
• (1) Mackie MRS10 10” 120 Watt Powered Active Studio Subwoofer Sub + Footswitch
• (1) Rockville RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount
• (1) Rockville RockShield 1 Studio Microphone Isolation Shield w/Sound Dampening Foam
• (1) Pair of Rockville RRS263M Foam Studio Monitor Isolation Pads 10.35" x 13"/3 Angles
• (2) Rockville RHTSC 36" Inch Bookshelf Speaker Stands Surround Sound Home Theater

Authorized Mackie Dealer!

MR824 8” Powered Studio Monitors offer professional performance, clarity and superior mix translation so you can listen with confidence knowing your mix will sound great anywhere. Drawing from Mackie’s extensive studio monitor design experience, MR824 monitors are precision tuned to stay true to your mix whether it’s dialogue, hip hop, rock and beyond. Our proven logarithmic waveguide provides an ultra-wide listening sweet spot and enhanced stereo imaging while the Acoustic Space controls allow you to adjust the frequency response of the monitor to match your studio. The studio monitor inspired by you – MR824 Powered Studio Monitors.

Features:

• Designed for superior mix translation and accuracy for professional results in any studio
  
• Equipped with Mackie’s proven logarithmic waveguide design
  
• Ultra-wide dispersion for enhanced stereo imaging and listening sweet spot
  
• Precise acoustic alignment offers incredibly balanced sound across the entire frequency spectrum
  
• 1” silk dome tweeter provides fast transient response for detailed high end and vocal clarity
  
• 8” polypropylene woofer delivers responsive, dynamic low frequency response
  
• 85 watts of bi-amplified Class A/B amplification
  
• Frequency response: 35 Hz – 20 kHz
  
• Optimize MR monitors for your mixing environment
  
• Adjustable acoustic space filters maintain flat response in typical placement configurations
  
• HF filter applies boost or cut to compensate for particularly dull or bright sounding rooms
  
• Professional all-wood cabinet design built to last and look great in any studio
  
• Custom designed internal bracing adds stiffness for reduced distortion and enhanced low frequency response
  
• Flexible inputs for simple connection to almost any audio source
  
• Acoustically optimized with sound-tightening acoustic absorption material
  
• Add the companion MRS10 studio subwoofer for powerful, deep low frequency extension perfect for electronic music, hip-hop and more
  

Advantages of purchasing from an authorized seller:

• Best prices - We sell all Mackie Products at the lowest price as possible.
  
• Full Factory Warranty
  
• Detailed information of all products
  
• Lifetime Customer Service by Mackie Product Experts
  
• Guaranteed legitimate and authentic merchandise
  

Please note: If you purchase Mackie from an un-authorized seller then you are taking a big risk. You will not have any manufacturers warranty, and there is no guarantee that the item is authentic, brand new, or even working.

Authorized Mackie Dealer!

Designed to add the perfect amount of dynamic, accurate low-end, the MRS10 10” subwoofer will enhance the listening experience in your studio without artificially adding boomy bass to your mix. Optimizing features include an adjustable crossover to dial in the right amount of low end for your studio plus a polarity switch to make sure your mix is always in phase. With foot-switchable bypass functionality, MRS10 can be muted while returning your monitors to full range at the push of a button. When your mix has some serious low end that needs to be heard, look no further than the MRS10.

Features:

• Mackie MRS10 10” 120 Watt Powered Active Studio Subwoofer Sub + Footswitch 
• Powerful, deep extended low end for your studio, perfect for electronic music, hip-hop and more
  
• Designed for responsive and accurate low frequency reproduction
  
• 120 watts of Class A/B amplification
  
• 10″ glass aramid composite woofer
  
• Shelf-ported for satisfying, deep low end
  
• Stereo XLR and TRS connection offer input flexibility
  
• Stereo XLR and TRS outputs for connection to mains
  
• Adjustable 40Hz to 180Hz crossover point
  
• Polarity switch (0 degrees / 180 degrees)
  
• Included footswitch bypasses the subwoofer and returns the connected monitors to full range
  
• Professional all-wood cabinet design built to last and look great in any studio
  
• Vibration-absorbing rubber feet minimize undesirable resonances
  
• Allows your mains to focus on highs/mids for optimum studio performance

Advantages of purchasing from an authorized seller:

• Best prices - We sell all Mackie Products at the lowest price as possible.
  
• Full Factory Warranty
  
• Detailed information of all products
  
• Lifetime Customer Service by Mackie Product Experts
  
• Guaranteed legitimate and authentic merchandise
  

Please note: If you purchase Mackie from an un-authorized seller then you are taking a big risk. You will not have any manufacturers warranty, and there is no guarantee that the item is authentic, brand new, or even working.

Video of RHTSC:

The Rockville RHTSC high performance wood speaker stands are designed with appearance, performance, and quality in mind. These stands are perfect for Bookshelf speakers, surround sound speakers and even studio monitors!

Our stands are finished with premium furniture-grade paint that will not crack, chip, or peel. They will look great in your living room, family room, den, or even studio. These stands are constructed from high quality medium density fiber core to minimize resonance. Unlike our competitors who use particle board we use a higher quality wood in the construction of our stands. 

With the included brass and rubber spikes as well as the included EVA speaker isolation pads you can feel confident that your speakers will be sturdy and perform optimally no matter what floor surface they are on. 

In addition to appearance and quality we also made sure to focus on performance. The height of these stands are 36”. The reason we chose this specific height is that after testing stands at other heights we noticed this height was optimal for listening. In addition to performance we also would like to note that at 36” these stands look gorgeous! The included isolation pads not only provide a no-slip surface but help your speakers achieve superior acoustic quality.

Another really cool feature I would like to mention is the empty body design. By adding sand to the body of the stand you can increase the weight if you so choose. The load capacity of these stands are 60 lbs. Most other stands on the market have a maximum load capacity of 20 lbs. which really is not enough for a lot of speakers on the market. These stands are sturdy, built well, look great, and out-perform the competition so buy with confidence! 

Includes:

• 8 Isolation pads
  
• 8 Brass spikes
  
• 8 Rubber spikes
  
• 4 Cable clips
  
• 4 Cable ties
  
• 16 Screws
  

Features of RHTSC:

• (2) Rockville RHTSC 36" Inch Bookshelf Speaker Stands Surround Sound Home Theater
• Pair Rockville RHTSC high performance wood speaker stands
  
• Finished with premium furniture-grade paint that will not crack, chip, or peel.
  
• Made from high quality medium density fiber core to minimize resonance
  
• Brass & Rubber spikes add stability to any floor surface
  
• Isolation pads create a no-slip surface as well as improve acoustical performance
  
• Empty body design allows you to add sand in order to increase the weight of the stands if needed
  
• 60 lbs. load capacity allows you to use a heavier speaker without compromising stability.
  

Specifications:

• Stands Height: 36"
  
• Base plate size: 11.8" 9.25"
  
• Top Platform size: 9.25" 7.28" (For smaller size speakers)
• Top Platform size 2: 9.25" 11.8" (For larger size speakers up to 8")
  
• Item Load weight capacity: 60 lbs.
  
• Item weight per pair 25 lbs.
  
• Shipping weight 29 lbs.
  
• Color: Classic
  
• Shipping dimensions 36” x 11.4” x 9.25”
  
• Product dimension 11.8” x 9.25” x 36”  

About Rockville Quality Control Procedures: 
The Rockville brand stands for Quality, Innovation and Value. We aim to deliver products twice as good as our competitors at a fraction of the cost of famous brands. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All functions and components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to have engineers and technicians test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to the factory to quality control every product. After production is complete Rockville has the head of QC in our overseas office test a certain percentage of all products from the production line a second time to ensure that the quality meets our strict standards. All Rockville products are backed with a hassle free warranty.   How to set up your RRS263M:

Video of RRS263M:

Authorized Rockville Dealer!

Description:

The Rockville RRS263M is specially designed to increase monitoring accuracy. These are made to decrease unwanted vibrations and noises so that you are left with accurate sounds. No matter how good your monitors are, they can never sound the way they were meant to if they are carrying over vibrations and unwanted noises into your music.  These are 10.5" by 13" and includes 2 pads which will accommodate (2) monitors.

Isolate your speakers!
Rockville isolation pads are designed to acoustically isolate your studio monitors. They were designed to work in studios and give studio quality sound; however some customers will also use them for high end home theater setups. Typically when speakers are placed on hard surfaces, they can vibrate. The vibrations cause the speakers’ sound to become inaccurate, unfocused and lose their “musical transparency." The Rockville Isolation Pad package includes a pair of high-density acoustic foam pads with multiple angle inserts that allow you to fine-tune your speakers positioning. Though conceived and designed for studio monitors/speakers you can decouple and isolate any sensitive studio device such as DVD players, turntables and laptops.

How to get maximum performance from your Monitors!
Rockville Studio Isolation Pads are the most cost-effective improvement you make to your sound system. Imagine the isolation pads as being your speaker systems “shock absorbers”.  Place the Rockville Isolation Pads under your monitors they will absorb vibrations and decouple your monitor to stop vibrations that would otherwise transfer into your studio environment. Isolation Pads will make a day and night difference in the sound quality of your studio. You spent good money on your studio monitors, now go the extra mile to make them sound their best.

Rockville Studio Isolation Pads Feature:

• Easiest and affordable way to improve your studio monitors sound
• Decouples your studio monitors from desktops and monitor stands for accurate reproduction
• Each package contains 2 Isolation Pads - enough for 2 studio monitors
• 2-part angled design provides you with a wide range of tilt options, including flat, +/-4 degrees, and +/-8 degrees
• Supports up to 100 lbs., so they can isolate a variety of studio gear
• Handsome charcoal gray color

Decouple your monitors for super-accurate sound
What Rockville Isolation Pads do is called "decoupling." When your monitors sit on your desk or floor, they transmit vibrations that cause the surface that they're sitting on to vibrate at low bass frequencies. These bass vibrations don’t get recorded in to your mix because they are not really in your mix. But when you play the mix in your studio the “coupled” vibrations, will be heard giving you false sound reproduction. But because these “coupled” vibrations are not being recorded when you play your mix outside of your studio, all those low bass frequencies will be gone. By “decoupling: your monitors, you eliminate these false low frequency vibrations, helping you to create accurate mixes that will sound great on any playback system.

Perfectly position your monitors
Rockville Isolation Pads allow you to position your studio monitors at the exact angle you need. Each pad comes in two pieces, each with a 4 degree angle. That allows you to tilt your monitor at one of five different angles: flat, +/-4 degrees, or +/-8 degrees. This allows you to place your monitors flat on your desk top or angled down for proper positioning.
The most affordable way to improve the sound of your studio monitors

Features:

• Rockville RRS263M Monitor Isolation Pads
• 10.5" x 13"
• 3 Adjustable Angles
  
• High quality, High Density Foam
• Eliminates vibrations and unwanted noises in your studio
  
• Price is for (2) pads which accommodates (2) speakers
  

About Rockville Quality Control Procedures:

The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty.

Video of RCM03:

Unboxing Video of RCM03:

 Authorized Rockville Dealer

The Rockville RCM03 condenser microphone performs better than famous branded microphones that cost over $150. This model is similar to our RCM01 however it is made of aluminum, and the frame is slightly larger. We also upgraded this model to a high end metal anti-wind cap! We highly recommend this design. This model is an amazing upgrade to our top selling RCM01 model!

Multi-Purpose
Designed for crystal clear capturing of vocals, acoustic and amplified instruments, as well as room reverb. The frequency pick up pattern makes the RCM03 amazing in studio applications.

The aluminum construction makes the RCM03 tough enough for Live sound applications as well!

Multiple connection options!
This microphone can be used in multiple ways. You can connect this to the phantom power of your mixer or you can connect it directly to your computer sound card. We include both cables! We include a cable to connect it to your mixer as well as a cable to connect the mic to your computer!

Quality built inside and out!
The microphone is made of aluminum. It is very rugged and tough like you would expect from any Rockville product. This microphone has a large diaphragm which is what enables our mic to deliver a wider range of high and low frequencies than our competitors. Our frequency range is tested at 30HZ – 20KHZ!  The mic sounds crystal clear sound with no distortion!

The PCB (circuit board) uses surface mounted components which is the same method the expensive brands use. We use only top components that under-go extreme testing by our own audio engineers.

The last thing that I need to mention and call out is that our product is very sturdy. Let me explain. When you are recording, you do not want even the slightest noises coming from your mic. The microphone consists of a casing and there is a cartridge inside the case. You do not want that cartridge moving around. We made sure to adjust our mechanism and ensure the cartridge is firmly in place and not creating any unwanted noises.

Best Value
After testing our Rockville condenser mics against mics that cost 300% more money, we found ours to be as good or better than the ones we tested against.


What's Included:

• RCM03 Condenser Microphone (made of aluminum!)
  
• 100% Copper 10 foot 3.5mm jack to XLR cable to connect mic to your computer or other device we need to update on ebay amazon, website, etc
  
• 100% Copper 10 foot XLR to XLR cable to connect to any mixer with phantom power
  
• Metal shock mount
  
• Metal Anti-wind foam cap
  
• Owners Manual
  
• Warranty card
  

Features:

• Rockville RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount
  
• Aluminum high quality construction
• Polar Pattern: Internally Polarized Condenser Cardioid Design
  
• Large diaphragm for smooth, natural sound and low noise
  
• Power Requirements: 48V DC Phantom Power
  
• Uni-directional
  
• Sensitivity: -27dB±2dB(0dB=1V/Pa at1kHZ)
  
• Output impedance: 200Ω±30%(at 1kHz)
  
• Standard operating voltage: 3V
  
• Operating voltage range: 1.5V-10V
  
• Current consumption: less than 500uA
  
• Voltage deduction characteristic:

  How to Set Up Your RockShield 1:

Video of RockShield 1:

Description:

Rockville’s RockShield 1 compact studio microphone isolation shield is the latest addition to our ever growing line of Pro Audio studio accessories. Featuring 1.5-inch-thick high density acoustic foam, the RockShield1 keeps unwanted outside audio waves and vibrations from affecting your recording. By creating an acoustic boundary around the microphone, vocal audio flow is improved. Your voice is redirected to the microphone, while room reflections are prevented from directly entering the recording area. The end result is you will achieve a crisper and cleaner sound. This shield can be mounted to compatible microphone stands or used in a fixed location, like a counter top or tabletop. Easy installation and studio quality performance will quickly make the RockShield 1 your go-to sound dampening isolation shield.

Features:

• Rockville RockShield 1 Studio Microphone Isolation Shield with Sound Dampening Foam
• Number of Panels: 3 Pieces
• Dimensions Each Panel: 8.2'' x 4.5'' inches
• Dimensions Assembled Unit: 11'' x 4.3” x 16.3” inches
• Keeps Excessive Room ambience and Off Axis Sound from interfering with your microphone when recording acoustic and vocal tracks
• Isolates Directional Microphones from Off Axis Coloration
• Limits External Bleed from Unintended Sound Sources
• 1.5" Thick High Density Pyramid Acoustic Foam
• Front and a vented metal back plate for the Best Noise Reflection Reduction
• Can be used in fixed location
• Stand Mountable
• Provides Vocal Booth Style Recordings with Minimal Footprint
• Professional Studio-Grade
• Rugged Finish Makes This Easy to Transport
• Tri-Pod Foot Design for Stability on Flat Surfaces
• 3/8” Die-Cast Metal Threads
• Mic Stand with 5/8” Adapter
• The shield frames are made of high strength die cast aluminum
• Net plates are made of high grade steel
• Net Weight (Without Tripod Stand): 1.1 lbs
• Net Weight (With Tripod Stand): 2.0 lbs