Break in any Guitar speaker in 5 hours or less Celestion Eminence Jensen Tone Tubby WGS EV Fane JBL

The EarCandy guitar speaker break in CD. Over 500 Sold!

Applies to Celestion, Eminence, Jensen, Tone Tubby, Weber, WGS, Austin speaker works, EV, Fane, JBL and more

Applies to any size Guitar, Bass, PA, Pro- Audio, Hi-Fi, Home Audio, Car Audio and Commercial Audio Speaker or Speaker set ups.

The EarCandy CD speaker break in tool is professionally engineered so that you do not have to match the speakers voltage requirement. It runs 5 to 65 cycle variations with crossed phase polarities. The cross phased polarities persuade the cone to wiggle back and forth in its X-max at high and low rates of speed sets.

This process duplicates playing through the speaker for 10 hours at approximately 50 watts, however this tool achieves this at very low to moderate volume levels that can be tolerated by your family and pets. You can isolate your cab and amp in a bedroom (even in an apartment) and the achieved break in result of playing this 75 minute CD is the same as playing for 10 hours at very high volume levels.

Running the CD 4 times for a total of 300 minutes (5 Hours) will achieve the same result as playing through the speaker at its rated wattage level for 40 hours.

Read More

The EarCandy Speaker break in tool is invaluable because once you own it, you can use it an unlimited amount of times on new cabs, new speaker installs and you never have to pay for an incorrectly executed overpriced factory break in process again.

The first 75 minute run will warm the speakers response and take the harsh crispiness off of the top end and greatly improve sustain, The Second 75 Minute run will further exercise the cone and surround, extending the bass response of the speaker (or speakers if you have a 2x or 4x guitar speaker cabinet)

The third 75 Minute run will further exercise the cone, surround spyder and voice coil increasing warmth, body, sustain, clarity and tone of the speaker or speakers and the fourth 75 minute run will polish off any remaining stiff components and finalize your speakers break in time.

We employed this cd on new speakers we installed in cabs and delivered these speaker cabs to performing artists that would throw the speaker right into the mix in live and studio settings and amazed performers, producers and soundmen alike. You can play the CD through your speaker cab using a home stereo or cd player with the headphone out going to your amp. This CD does not have to be played loud for it to work. The files on the CD are CD files, not MP3 files so an MP3 player may not read the CD, but any CD player in the USA will work.

Other companies that offer FBI or factory broken in speakers run the speaker at abusive volume levels to the point where they have to stop the process and let the speaker cool down for an hour. This is not recommended and will shorten the life of the motor structure leading to eventual total failure of the speaker. It is akin to overheating a new automobile engine and then letting it cool off for an hour.

The way the EarCandy speaker break in CD tool was produced, creates simulated decibel levels as high as 140db at wattage levels as low as 2 to 5 watts, preventing over heating of the voice coil, avoiding damage that may not show up for 6 months to a year. The End result of employing this speaker break in CD is larger Bass and low mids and mid-range response with warmer clarity, articulation, depth and definition. It also provides subtle reduction in high end frequencies that sound harsh and undesirable to the ear.

This process also softens the cone, surround spyder and motor structure providing more sustain and body to the overall tone of ANY guitar speaker. All without blaring the speaker with UN necessary wattage levels that can cause unforeseen damage in the future life of the speaker because the voice coil is never over heated. The coil is warmed, so it will expand and contract slightly, creating a safe, fast and proper coil break in with NO possibility of any damage in the long term.

If you notice, speaker companies that provide the FBI or factory break in service only offer a 1 year warranty and this is because the damage that occurs when their break in process is overdone and inevitably can and will cause total failure of the speaker motor structure. EarCandy.Com guarantees this will not happen when our speaker break in CD tool is implemented correctly. Our guitar speaker break in CD comes with very simple and easy to use instructions and provides a safe, thorough, quiet and fast break in process that will allow you to enjoy your speaker or speakers for a lifetime.

An unforeseen benefit of this CD guitar speaker break in tool was when we employed it into guitar speaker cabs that had been used for years with only certain genres of music, the CD break in tool exercised those speakers in ranges the speakers had never experienced and raised the overall tone and performance level of speakers professional performers thought had been broken in for a long time. We like to look at it like a Guitar speaker break in and subsequent guitar speaker tune up tool. The Tune up on speakers that have been played through for years only took one to two 75 minute runs, tops.

ALL OF THE INFORMATION, TEXT, CONCEPT, ARTWORK, PRODUCT DESCRIPTION, PRODUCT AND FORMAT HAS BEEN COPY RIGHT 2014-2020 AND IS THE SOLE INTELLECTUAL PROPERTY OF TIM PAULSEN / EARCANDY LLC. UNDER NO CIRCUMSTANCE MAY ANYONE CUT, PASTE, COPY, DUPLICATE OR REPLICATE ANY OF THIS INFORMATION OR ARTICLE IN ANY WAY SHAPE OR FORM. FAILURE TO IGNORE THIS WARNING OR NOT COMPLY WITH STATUTE 2862 ARTICLE SECTIONS 1201, 1202, 1203, 1204, 1205, COMBINED WITH STATUTE 112~2864 PL 105-304 WILL RESULT IN SWIFT, UN-FORGIVING LEGAL LITIGATION AGAINST ANY AND ALL PARTIES INVOLVED IN VIOLATING OUR COPY RIGHT. LEGAL ACTION WILL BE PURSUED WITH EXTREME PREJUDICE UNDER STATUTE 2862 ARTICLE SECTIONS 1201, 1202, 1203, 1204, 1205, COMBINED WITH STATUTE 112~2864 PL 105-304.

We upload your tracking number right here through Reverb.Com.

You will get a tracking number when your item ships.

If you have any questions, please message us right here through Reverb.Com

Thank you!