Yorkville 50KW | 50W, 2-Channel, 10” 2-Way Wedge Amplifier.
Brand New with Full 2-Year Unconditional No-Faul (even if YOU break it) Warranty!
50KW 50 watt vocal / instrument powered monitor, 2 input, 10" speaker, tweeter
Descriprion
Versatility, performance and portability best describe Yorkville's keyboard amplifiers. Better fidelity is needed to bring out the complex sounds that today's synthesizers and samplers can provide. Applying Yorkville’s knowledge and experience in professional audio designs, Yorkville’s engineers incorporate the features and performance of high quality P.A. systems into these amps so that they will also faithfully reproduce acoustic-electric instruments, voice and pre-recorded music. If you're looking for the best in keyboard/mixer amplifiers, look no further than Yorkville. Inside we use high-grade glass epoxy circuit boards, low noise metal film resistors, phone jacks with gold plated contacts. Outside you will find heavy gauge metal speaker grilles, ¾” plywood construction, rugged lcarpet covering
Overvire
For the professional musician who needs a sub-compact instrument amplifier with a wedge format, the 50KW is sure to fit the bill. Two input channels capable of handling 1/4-inch, XLR or RCA inputs mean the 50KW can connect to virtually any source. A solid plywood cabinet construction, black carpet covering, curved perforated all-metal grille and a recessed control panel ensure the 50KW will perform flawlessly night after night.
Features
-
50 watt powered wedge monitor
-
Two discrete input channels
-
EFX-send/line-out and EFX-RTN/amp in
-
10-inch & Tweeter
-
Solid plywood cabinet construction
-
Curved all-metal heavy gauge perforated metal grille
-
Made In Canada
-
Two Year Unlimited Warranty*
*Two-Year Unlimited Warranty in USA and Canada Only, Other Territories May Vary
Specs
-
Power @ min. impedance (Watts) 50
-
Minimum Impedance (Ohms) 4
-
Burst Power - 2 cycle 70 Watts
-
Speaker Configuration - LF (Size / Power) 10 inch / 50 Watts
-
Speaker Configuration - HF (Size / Power) 3.75 inch / 75 Watts
-
Inputs 2
-
Channel 1 - Inputs XLR, 1/4 inch TRS
-
Channel 1 - Controls Volume
-
Channel 2 - Inputs 2x 1/4 inch TRS, RCA
-
Channel 2 - Controls Volume
-
Main Tone Controls Low, High
-
Input Sensitivity (mV) ch. 1 XLR=3 Phone=10, ch.2 Phone=100 RCA=100
-
Line Out (type / configuration) 1/4 inch / Front (Effects Send)
-
Line Out Sensitivity (Vrms) 1
-
Effects Loop / Location Yes / Front
-
Effects Return Sensitivity (Vrms) 1
-
LED Indicators Power
-
Limiter / Switchable No
-
Headphone Jack Yes
-
Dimensions (DWH, inches) 12 x 15 x 17
-
Dimensions (DWH, cm) 30 x 38 x 43
-
Weight (lbs / kg) 22.5 / 10.3
Specifications subject to change without notice