Tascam US-322 USB 2.0 Audio Interface w/ DSP Mixer

The Tascam US-322 USB 2.0 Audio Interface w/ DSP Mixer is a USB audio interface with on-board DSP mixer and up to 96kHz recording. It has high-quality HDDA Mic Pre-Amps and a wealth for features for superior sound. To ensure superior sound, TASCAM organized months of tests and trials to design the HDDA mic pre-amplifier. Manufactured with a discrete structure and select premium parts, the HDDA pre-amp achieves a wide frequency response (10Hz to 68kHz), low S/N ratio, low noise and low THD+N. In the process of creating music, many engineers have started utilizing high-resolution formats while recording to ensure the best quality sounds. The US-322 is suited perfectly for these high-quality minded recordings.

The US-322 is designed with two XLR with +48V phantom power and two TRS inputs. Having both options for condenser mics and line level inputs ensures you are getting the best possible sound and lowest-noise when recording. In addition, INPUT-1 can connect any high-impedance equipment directly, like a guitar.

The US-322 is designed with on-board effects such as compressor, 3-band EQ and Reverb all located on-board the DSP. While recording, you can use the input effects for any input signal and the reverb effect on any monitoring signal at the same time. The US-366 is built with a "MIXER PANEL" button located conveniently on top. This button provides a one-click recall function for the DSP-mixer. When pushed a second time the mixer panel will be conveniently hidden.

The US-322 provides low-latency monitoring via the on-board digital mixer. Volume can be monitored and adjusted easily with the dedicated knob on the top-panel. This oversized volume knob can be an integral setting for easy and speedy fine level adjustments. The US-322's classy desktop design and rugged aluminum body give a luxurious feel. The US-322 look so good, you'll be motivated to use it. The adopted "Desktop Layout" makes these models easy-to-use even in tight spaces.

Tascam US-322 USB 2.0 Audio Interface w/ DSP Mixer Features

• High-quality HDDA (High Definition Discrete Architecture) mic pre-amps
  
• Up to 24bit/96kHz recording
  
• Two XLR/TRS (MIC/LINE) inputs with full +48V phantom power supply
  
• Low-latency monitoring via DSP mixer
  
• On-board digital mixer (DSP mixer) delivers two operation modes
  
• On-board digital effects(DSP effects) (DSP effects can use on 44.1/48kHz operating)
  
• Dedicated "MIXER PANEL" button recalls DSP mixer with one-click
  
• Oversized LINE OUT volume knob
  
• Two TRS analog balanced outputs
  
• Two RCA analog unbalanced outputs
  
• 18mW+18mW headphone output
  
• Desktop design provides highly stability and usability
  
• Aluminum body provides premium looks and luxurious feel
  
• USB bus-powered for mobile recording
  
• Steinberg Cubase LE6 bundle