Tascam - US-16x08 - 16-in, 8-out USB 2.0 Audio/MIDI Interface

Brand NEW!  
Including 90 Days USA Factory Warranty.
Product Highlights  
24-bit/96 kHz Resolution 8x XLR Mic Inputs & 8x TRS Line Inputs DSP Monitor Mixer with EQ & Compression Ultra-HDDA Microphone Preamps 5-Pin DIN MIDI I/O Angled Design for Desktop Use Mac, Windows, iOS Compatible Includes Rack Ears & USB Cable  
Allowing you to record up to 16 channels simultaneously in up to 24-bit/96 kHz resolution, the US-16x08 USB Audio/MIDI Interface from Tascam features 8 XLR microphone inputs with their Ultra-HDDA preamps and 8 TRS line level inputs, 2 of which can be switched to instrument level for DI recording. A DSP mixer allows you to route any signal to any output and gives you a 4-band EQ and compression for each channel, allowing you to tweak a monitor or headphone mix.  
Its angled design allows you to use the US-16x08 right on your desktop, while the included rack ears provide the ability to rack mount the system. Not limited to audio, its 5-pin DIN MIDI I/O lets the unit function as a MIDI interface as well. It is compatible with Mac, Windows, and iOS (requires Apple's Camera Connection kit, not included for iOS use).  
Discrete Ultra-HDDA Mic Preamps Tascam's Ultra-HDDA (High Definition Discrete Architecture) mic preamp design is based on discrete components, just like classic professional gear. They achieve an EIN rating of -125 dBu, meaning their noise level is practically below the range of hearing. But instead of judging the design merely by test measurements, key components were selected following extensive listening tests NE5532 Op-Amps Tascam uses proven components throughout the US-16x08. One example is the NE5532 op-amp, used throughout classic recording consoles and signal processors due to their musical sound Instrument Inputs The first two channels can be switched to direct guitar inputs for direct recording of electric and acoustic guitar and bass without the need for an external preamp High SPL Handling The Ultra HDDA mic preamps and line inputs offer 20 dB of headroom for distortion-free recordings of percussive, high SPL instruments like drum tracks and guitar solos 8 XLR Mic Inputs and 8 TRS Line Inputs The eight XLR mic inputs have switchable +48V phantom power to use up to 8 condenser mics at the same time. The two front panel TRS line inputs are switchable between instrument level and line level input with adjustable gain. An additional six TRS line ins on the rear of the unit are switchable between -10dB and +4dB. All of the jacks support balanced or unbalanced 1/4" signals Standalone Mic Preamp When powered on without a USB connection, the US-16x08 functions as an 8-channel microphone preamp. Mics pass through the Ultra-HDDA preamps to the eight balanced line outputs on the rear panel. Use the interface to add additional high-quality mic inputs to a mixer or audio interface DSP Mixer and USB Driver Digital processing features like the DSP Monitor Mixer and USB drivers make sessions with the US-16x08 comfortable for the musicians and engineer. The DSP Mixer includes processing for a polished-sounding headphone mix without latency delay from your DAW software, fueled by a Blackfin DSP processor. And drivers, re-written from the ground up, provide improved compatibility and performance on Mac, Windows and iPad recording systems High Resolution Recording The converters and electronics on the US-16x08 allow you to record at audio resolutions up to 96 kHz/24-bit for detailed acoustic productions Standard USB 2.0 Computer Connection The US-16x08 uses USB 2.0 to connect to your computer. Connect the interface to any available USB port. USB 2.0 provides plenty of data bandwidth, even when recording 16 channels at 96 kHz/24-bit. The US-16x08 will also work with USB 3.0 jacks on your computer EQ and Compression on Each Monitor Mixing Channel Powered by an Analog Devices BlackFin DSP processor, the US-16x08 includes an advanced digital mixer for monitor mixing. Each input includes 4-band EQ, a low-cut filer, and compressor. The DSP mixer can store up to 10 snapshots as scenes - making it easy to recall mixer settings. The DSP mixer feature can even be used as a live mixer, controlled by your PC. An additional tab opens a digital patchbay to route signals to any output Driver Software The US-16x08 includes a driver architecture that was written in-house by Tascam engineers. The Windows driver software can be installed without connecting the interface, with simple on-screen instructions. Mac users can use the interface without installing a driver at all. Simply install the control panel software in order to change device settings. Finally, the class-compliant driver allows it to be used with tablets like Apple's iPad. (Requires Apple's Camera Connection Kit for USB connection, not included) Angled Design The angled design makes desktop viewing and operation much more comfortable for tabletop use. All other interfaces have their controls on the front or the top of the device, causing you to crane your neck to read the knobs and switches. A pair of rack ears are also included for use in a standard 19" equipment rack Independent Headphone and Line Output Volume Control The US-16x08 includes both headphone and line output volume controls. Even when both powered monitors and headphones are connected, the user can set an optimum level for each during operation. And when you want to work on headphones, you don't need to reach around to switch off your monitors Built-In Headphone Amplifier The 70 mW+70 mW (into 32 ohms) headphone amp makes headphone monitoring easy even in loud situations. This assures you enough monitoring volume when recording drums, guitars, or rehearsals, live or in the studio MIDI I/O Standard MIDI input and output connectors allow connection with the thousands of keyboards, drum machines, controllers, and other sources that employ 5-pin DIN MIDI connectors. The interfaces can also be used for synchronized operation of multitrack recorders and other external recording equipment Full Metal Body The durable metal jacket is employed for heavy duty use  
Tascam US-16X08 Specs Resolution Sampling Frequency   44.1, 48, 88.2, 96 kHz Bit Rate   16/24-bit Analog Audio Inputs Microphone Input   Connector: XLR-3-31(1: ground, 2: hot, 3: cold ), balanced Input Impedance: 2.4 kOhms Nominal Input Level, Max Gain: -68 dBu (0.0003 Vrms) Nominal Input Level, Minimum Gain: -12 dBu (0.195 Vrms) Maximum Input Level: +8 dBu (1.947 Vrms) Gain: 56 dB Instrument Input   Connector: 1/4" (6.3 mm) TS-jack (T: hot, S: ground), unbalanced (When set to "INST" at LINE/INST switch) Input Impedance: 1 MOhms or more Nominal Input Level, Max Gain: -41 dBu (0.0069 Vrms) Nominal Input Level, Minimum Gain: +4 dBu (1.228 Vrms) Maximum Input Level: +24 dBu (12.182 Vrms) Gain: 45 dB Line Input   Set to -10 dBV at Level Switch: Connector: 1/4" (6.3 mm) TS-jack (T: hot, S: ground), balanced Input Impedance: 10 kOhms or more Nominal Input Level, Max Gain: -41 dBu (0.0069 Vrms) Nominal Input Level, Minimum Gain: +4 dBu (1.228 Vrms) Maximum Input Level: +24 dBu (12.182 Vrms) Gain: 45 dB  
Set to +4 dBu at Level Switch: Connector: 1/4" (6.3 mm) TS-jack (T: hot, S: ground), unbalanced Input Impedance: 10 kOhms or more Nominal Input Level: +4 dBu (1.228 Vrms) Maximum Input Level: +24 dBu (12.182 Vrms) Analog Audio Outputs Line Output   Connector: 1/4" (6.3 mm) TS-jack (T: hot, S: ground), balanced Output Impedance: 100 ohms Nominal Output Level: +4 dBu (1.228 Vrms) Maximum Output Level: +24 dBu (12.177 Vrms) Headphones   Connector: 1/4" (6.3 mm) stereo phone jack Maximum Output Level: 70 mW +70 mW or more (THD+N 0.1% or less, 32 ohms loaded) MIDI Connector   5-pin DIN Format   Standard MIDI format USB Connector   USB B type, 4 pin Format   USB 2.0 HIGH SPEED mass storage class Power Power   Dedicated AC adapter Power Consumption   12 W Audio Frequency Response   Line Output (Balanced): 44.1/48 kHz: 20 Hz to 20 kHz, +/-0.3 dB (JEITA) 88.2/96 kHz: 20 Hz to 40 kHz, +/-0.3 dB(JEITA) THD   0.008 % or less S/N Ratio   100 dB or more Crosstalk   100 dB or more EIN   -125 dBu or less System Requirements Windows   OS: Windows 7 (32-bit SP1, 64-bit SP1), Windows 8.0 (32-bit, 64-bit), Windows 8.1 (32-bit, 64-bit) Computer Compatibility: Windows compatible computer with a USB 2.0 port CPU Type/Speed: Dual core/2 GHz or faster Memory: 2 GB or more Driver: ASIO 2.0, WDM (MME) Mac   OS: OS X 10.9, OS X 10.9 Compatible Computers: Apple Mac with USB 2.0 port CPU Type/Speed: Dual core/2 GHz or faster Memory: 2 GB or more Driver: Core Audio, Core MIDI iOS   iOS 7 General Operating Temperature   41 to 95°F (5 to 35°C) Dimensions (W x H x D)   17.5 x 2.3 x 8.6" (445 x 59 x 219 mm) Weight   6.1 lb (2.8 kg) Packaging Info Package Weight   8.7 lb Box Dimensions (LxWxH)   21.3 x 11.6 x 5.1"  
- All international buyers are responsible for all tax, duties and/or customs fees.