TILT TONE CHANNEL/500 At a Glance
- åÊClass A Discrete input line buffer amp
- åÊClass A Discrete 10meg ohm DI input
- åÊClass A Discrete output amp
- åÊPhoenix custom output transformer
- åÊUnique 3 position Tilt EQ
- Controllable LF, MF & HF Tilt positions
- Dark & bright tone control
Overview
The Tilt Tone Channel 500 (Tilt TC/500) is a 500 series channel strip featuring aåÊbalanced line levelåÊsignal processor incorporatingåÊour class A discrete buffer amp from our worldåÊrenowned Nicerizer summing mixer, aåÊDI with our 10meg ohm inputs found in our Nice DI and a Tilt EQ circuit.åÊ
Tilt TC/500åÊuses aåÊpowerful tone control Tilt EQ ,åÊa unique 3 position Tilt EQåÊwith 3 carefully selected tilit positions to cover low frequencies at 160hz, mid frequencies at 800hz and highåÊfrequencies at 1.6khz. A dark/bright shaping control, allows youåÊtoåÊtilt the EQ toåÊdarken your mix (add LF) or brighten the mix (add HF).
There is a also a 10 position LED metering that accurately representsåÊthe output level.
The unit can also be used in bypass mode, the ouput control can be driven bringing in the Class A discrete output circuitry and output transformer to add analogue colour and saturation to any source, and a pair of units would be excellent on a mix bus or mastering.
Specifications
- Class A Stereo DI Output specs.
- Frequency Response: 20Hz to 20Khz +/- 0.5dB
- Maximum Output: +26dBu @ 1Khz
- Noise: 90dB @ 22Hz to 22KHz
- Class A, discrete, truly balanced transformerless input stage.
- The Class A DI has a very high input impedance (10Mohm), without the use of FET's. This means that the guitar pickups are not loaded as with a lower impedance input, and so allows every transient to be reproduced, making even a cheap guitar sound exceptional.
- Inputs: 1/4" jack (TS) input & through input on the front panel
- Transformer isolated balanced output (XLR) on the rear panel
- Tilt EQ with 3 fixed Tilt positions : 160hz, 800hz & 1.6khz
- Dark/bright tone control
- 10 position LED output metering.
- Output level control.