Vermona '14 Analogsynthesizer (O-135/222)

Good
$1,875.99
Free Shipping
Listing Ended
If you watch the listing, we'll notify you if it becomes available again.
Shipped From
Kraft Music
Franklin, WI, United States
3,514
Sales
7000+
Joined Reverb
2016
Preferred Seller
Quick Responder
Quick Shipper

About This Listing

This Vermona '14 is being sold with a full manufacturer warranty. It has been carefully examined to ensure that it's fully functional. There may be signs of wear or use. Shop with confidence. This item is also covered by Kraft Music's 45-day guarantee.

With the completion of the '14 Analogsynthesizer, a long-fostered Vermona dream comes true: the design and realization of an uncompromising synthesizer for instrumentalists.

Marriage of ergonomics and sound
For Vermona, 'expressive play' requires a balanced relationship between performance virtuosity and sound design. In the '14 Analogsynthesizer, these factors come together as equals: keyboard, pitch and modulation wheels are incomplete without the other controls and switches on the panel, which offer direct access to each individual sound-shaping parameter of the synthesis engine.

The '14 Analogsynthesizer is perfectly suited for distinctive solo and bass sounds, including dynamic and subtle sonic variations that are completely under your control at any time.

Uncompromising circuit implementation
The components responsible for the sound-generation and -shaping are based on the tried and tested circuits of Vermona's PERfourMER MKII and Mono Lancet '15 synthesizers. That said, they did not just bring over those circuits as is but have adapted and refined them specifically for the '14 Analogsynthesizer. Besides stability and musicality, Vermona paid great attention to intuitive and practical scaling of each and every sound parameter.

The '14 Analogsynthesizer follows the classic subtractive synthesis structure: a versatile lowpass filter molds the raw sound created by two powerful analog oscillators. As is typical for Vermona instruments, the sound is warm, round and classy and stands out in the mix.

Handmade in Vermona's Electroacoustic Manufacture in Germany
There are hundreds of steps in the creation of a single '14 Analogsynthesizer, from the assembly of the circuit boards to the final, rigorous quality assurance of the finished instrument. Without exception, these steps are carried out with skilled craftsmanship and expert precision at Vermona's Elektroakustische Manufaktur in Erlbach, Germany.

Limited edition
Each ’14 Analogsynthesizer is an outstanding instrument and leaves Vermona's facility as one of just 222 units.

  • VCO 1
    • Octaves: 16', 8', 4', FIX
    • Tune coarse: ± one octave
    • Tune fine: ± 1/2 note
    • Waveforms: sine, saw, rectangle
    • Pulse width: can be set manually between 50% and 95%
    • EG 1 intensity: about ± 2-1/2 octaves
    • Sub-oscillator: sine, one octave below main oscillator
  • VCO 2
    • Octaves: 16', 8', 4', FIX
    • Tune coarse: ± one octave
    • Tune fine: ± 1/2 note
    • Waveforms: sine, saw, rectangle
    • Pulse width: can be set manually between 50% and 95%
    • EG 1 intensity: about ± 2-1/2 octaves
    • Sub-oscillator: square, one octave below main oscillator
    • Frequency modulation through LFO and sine wave of VCO 1
    • Hard sync through VCO 2
  • VCO 1 and VCO 2
    • Master tune: about ± 1/2 note
    • Glide with legato function
    • Pulse width modulation through LFO (up to 100% pulse width)
  • Mixer
    • Volumes of both oscillators and sub-oscillators can be controlled individually
    • Noise generator (white noise)
    • Volume control for external input
  • Filter
    • Type: lowpass with resonance
    • Slope: 12, 18, or 24 dB/octave
    • Key tracking: off, half (50%), full (100%)
    • Modulation sources: LFO, EG 1, sine wave of VCO 1 (can additionally be controlled by EG 1)
  • VCA
    • Modes: on, EG 2, EG 2 + LFO
    • Individual volume controls for main outputs and headphone outputs
  • Envelope generators EG 1 und EG 2
    • Type: ADSR
    • Attack: 1 millisecond to 10 seconds
    • Decay: 1 millisecond to 10 seconds
    • Release: 1 millisecond to 10 seconds
    • Legato mode can be switched on/off per envelope generator
  • LFO
    • Waveforms
      • Saw up
      • Saw down
      • Square
      • Triangle
      • Sine
      • Sample & hold
    • Frequency range: 0.05 Hz (20 seconds) to 100 Hz
    • Can be synchronized to internal or external clock
    • Reset function
  • Vibrato
    • Waveforms: sine or triangle
    • Frequency range: 0.05 Hz (20 seconds) to 100 Hz
    • Modulation destinations: VCO 1, VCO 2, VCO 1 and VCO 2
    • Modulation intensity can be controlled by aftertouch and/or modulation wheel
  • VCF MOD
    • Modulation destinations: cutoff frequency, filter FM intensity through sine wave of VCO 1
    • Modulation intensity can be controlled by aftertouch and/or modulation wheel
  • Keyboard
    • 44 keys, half-weight Fatar keybed
    • Aftertouch
    • Velocity for controlling cutoff frequency and/or VCA modulation through EG 2
  • Pitchbender
    • Can be adjusted freely between ± 1/2 note up to ± 1 octave
    • Modulation destinations: VCO 1, VCO 2, VCO 1 and VCO 2
  • Arpeggiator
    • Modes: ARP (classic arpeggiator mode), SEQ (complete arpeggios can be stored)
    • Up to 60 notes with velocity
    • Arpeggios can include rests between notes
    • Same notes can be used more often (with help of sustain pedal)
    • Variable gate length
      • 20%
      • 50%
      • 80%
      • 100% (legato)
      • Random values between 20% and 80%
      • Random values between 20% and 100% (legato)
    • Patterns
      • Up (1, 2 or 3 octaves)
      • Down (1, 2 or 3 octaves)
      • Up and Down (1, 2 or 3 octaves)
      • Alternate up
      • Alternate down
      • Random (1, 2 or 3 octaves)
      • Order played forward
      • Order played backward
    • Can be triggered by LFO, internal or external clock
  • Connections
    • Audio outputs
      • Headphones (1/8" and 1/4" jacks)
      • Unbalanced 1/4" jack (line)
      • Transformer-balanced XLR output (line)
    • Audio input: 1/8" jack
    • CV/gate outputs (1/4" and 1/8" TRS jacks)
      • Gate out
      • Modulation wheel
      • 1V/octave
      • Pitchbender
    • Sustain pedal input: 1/4" jack
    • Volume pedal input: 1/4" jack with trim pot for minimum volume
    • MIDI connections: in, out, thru
  • MIDI
    • Send
      • Keyboard (polyphonic)
      • Arpeggiator
      • MIDI Control Changes for controlling Mono Lancet and Mono Lancet ’15 parameters
    • Receive
      • MIDI notes
      • MIDI clock

Product Specs

Listed2 years ago
ConditionGood (Used)
Good condition items function properly but may exhibit some wear and tear.learn more
Brand
Model

Seller Reviews

3,514