With its compact and portable design, the System 10 Camera-Mount high-fidelity digital wireless system is ideally positioned to capture media on the go. Perfect for video production, electronic news gathering (ENG) and every mobile application in between, the receiver features multiple mounting options to accommodate a variety of cameras and recording devices.
Like all of the products in the System 10 digital wireless family, the Camera Mount provides three levels of diversity assurance: frequency, time and space. Instantaneous channel selection, sync and setup make the Camera-Mount extremely easy to use, while its digital 24-bit/48 kHz wireless operation provides the ultimate in sound quality and dependable performance. Also, as the receiver operates in the 2.4 GHz range, it remains completely free from TV interference at all times.
Digital 24-bit/48 kHz wireless operation for ultimate sound quality and dependable performance Operates in the 2.4 GHz range – completely free from TV interference Ultra compact receiver size with multiple mounting options Selectable balanced and unbalanced output jacks with level control for use with most cameras and recording devices Internal rechargeable 12-hr battery Separate headphone port and volume control for local audio monitoring Multi-pairing function to link a single receiver with up to eight body-pack or handheld transmitters Three levels of diversity assurance: frequency, time & space Automatic frequency selection for seamless, interference-free operation Extremely easy operation with instantaneous channel selection, sync and setup
Operating Frequencies 2.4 GHz ISM band Dynamic Range >109 dB (A-weighted), typical Total Harmonic Distortion <0.05% typical Operating Range 30 m (100') radius, 60 m (200') diameter typical Open range environment with no interfering signals Operating Temperature Range 0° C to +40° C (32° F to 104° F) Battery performance may be reduced at very low temperatures Frequency Response 20 Hz to 20 kHz Depending on microphone type Audio Sampling 24 bits / 48 kHz RECEIVER SPECIFICATIONS Receiving System Diversity (frequency/time/space) Maximum Output Level 3.5 mm (1/8"), TRS balanced: +6 dBV Dual mono, unbalanced: 0 dBV Power Supply 100-240V AC (50/60 Hz) to 5V DC 0.5A switched mode external USB-type external power supply Battery Internal Battery: 3.7V rechargeable Li-ion battery Battery Rating: 5.5 Wh 1,460 mAh Battery Life 12 hours Depending on environmental conditions
Charging Temperature Range: 5° C to +35° C (41° F to 95° F) Dimensions 56.0 mm (2.20") W x 91.4 mm (3.60") H x 27.8 mm (1.09") D Net Weight 105 grams (3.7 oz) Accessories Included Two antennas; camera shoe mount; AC adapter (USB-type); USB cable; 3.5 mm (1/8") stereo cable BODY-PACK TRANSMITTER SPECIFICATIONS RF Power Output10 mW Spurious EmissionsFollowing federal and national regulations Input ConnectionsFour-pin Locking Connector Pin 1: GND, Pin 2: INST INPUT, Pin 3: MIC INPUT, Pin 4: DC BIAS +9V BatteriesTwo 1.5V AA not included Battery Life>7 hours (alkaline) Depending on battery type and use pattern Dimensions70.2 mm (2.76") W x 107.0 mm (4.21") H x 24.9 mm (0.98") D Net Weight100 grams (3.5 oz) without batteries HANDHELD TRANSMITTER SPECIFICATIONS RF Power Output 10 mW Spurious Emissions Following federal and national regulations Batteries Two 1.5V AA not included Battery Life >7 hours (alkaline) Depending on battery type and use pattern Dimensions 254.8 mm (10.03") long, 50.0 mm (1.97") diameter Net Weight 280 grams (9.9 oz) without batteries Accessory Included AT8456a Quiet-Flex™ stand clamp In The Box: (Model ATW-1701)
Audio-Technica System 10 Camera-Mount Digital Wireless Microphone System (Microphone Not Included) Hot- or Cold-Shoe Adapter ATW-R1700 Camera-Mount Wireless 2.4 GHz Receiver ATW-T1001 System 10 Digital UniPak Transmitter. (Microphone NOT included). Limited 2-Year Warranty