Rukavina Offset J Model Guitar w/Walnut and Zircote Neck 2018

Sorry, this listing is no longer available.

Sold!

This guy has a black walnut neck topped with a zircote fingerboard.  The body is African mahogany with center laminations of black walnut and wenge.  It has 18:1 Grovers, a hardened brass nut, and a Wilkinson half Tele bridge.  It's string through with a one-piece delrin ballend retainer inlay, vs individual ferrules. The controls are independent vol and tone for each pickup, the pickups being my own winds.  The tone for the bridge coil is also a push-pull that activates a coil cut when up. The bridge coil is a moderate to high output, wound with 44 gauge wire and using Alnico V, and the neck coil is a P-90 wound with 42, also using slightly degaussed Alnico V magnets. Pickups are wax potted and the cavities are fully copper shielded. When the coil cut is activated and the 3-way pickup selector is in the middle(both) position, the particular coils operating are in phase(rwrp) not out of phase.  It is 25" scale length with a 12" fingerboard radius.  The neck has a two-way truss rod, freely accessible, and it uses Jescar FS47095, and the 12th fret is decked out with a gold(en) fret...Jescar's EVO wire of the same spec.  The neck is a slightly offset C at the nut(a little extra thumb room/grab on the bass side, measuring .830" thick. It transitions to a straight C shape at the neck joint to .915" thick.  Nut width is 1 11/16" and the bridge is F spaced.  Comes strung and set up wiht D'Addario 10s. Weight: 8.25lbs.

Includes a hard shell case and domestic Ground UPS Shipping.  Folks in non-US locations may inquire directly for prospective shipping to your area.
**I took photos prematurely to setting it up the nut action in these images. It is not yet pinned and polished up, just like the other T model I have listed, but it will be pinned and polished just the same. I'll update photos upon setting it up later today.

Thank you for looking!

Product Specs

Condition:
Brand New (New)
Brand
Rukavina
Model
J Model Guitar w/Walnut and Zircote Neck
Finish
Clear Satin
Year
2018
Made In
United States

Audio

About The Seller

Rukavina Guitars
Joined Feb 2014
Missoula, MT, United States

Accepted Payment Methods

  • PayPal

Shipping Policy

Ships from Missoula, MT, United States to:

Continental U.S.
$0.00

Tax Policies

This shop collects taxes in the following regions:

Minnesota*
Washington*
*State sales tax is required in this region. Learn More

Return Policy

Return Window

This product can be returned within 7 days of receipt.

General Terms

Items must be returned in original, as-shipped condition with all original packaging and no signs of use. Buyer assumes responsibility for all return shipping costs unless the item was not received as described.

Refunds

Buyer receives a full refund in their original payment method less any shipping costs.

Rukavina Guitars

Missoula, MT, United States
Joined: Feb 2014