Fender Silver face grill cloth 36"x36" guitar amp speaker combo cab repair restoration NEW

Speaker Grill Cloth Fabric, Fender Silver 1 Yard 36"x36"

Restore That Vintage Guitar Amp...

...or
add flair to your custom-built project! This woven OEM speaker grill
fabric is the perfect solution for restoring your old Fender,
Marshall, Peavey, plus many other vintage guitar and bass, amps and
speaker cabinets. Although a common or original application is listed,
only your imagination can limit its uses.

Additional Information:
36" wide and sold per linear yard. Color: Fender Silver- Used on
Fender silver face amps and speaker cabinets.

Restore that vintage
guitar or bass, amp or speaker cabinet, or add flair to your
custom-built project with this woven OEM speaker grill fabric.

Highlights

• Matches grill fabric used on many amps and speaker cabinets
• 36" wide and sold per linear yard
• Shipped rolled not folded Shipped in a 36" poster tube with the USPS priority mail.

All cloth products are sold by the square yard = 36x36 or 3 feet x 3
feet. You will receive your order in one roll, if you order 3 yards, you
will receive material 36x 108 (3 feet wide x 9 feet long). All
quantities will ship in one piece. Please note that these materials are
cut to order so they can not be returned.

How much grill cloth will I need?

Measure the area you want to cover with your grill material and add 4
inches to each side. For example, our BuzzBomb grill is 26x16, so
when we shear the cloth for assembly we cut a piece that is 30x20.
This is crucial for getting the cloth on with room to pull it taught and
make sure your lines are straight.

What is the best way to attach the grill cloth to my baffle or frame?

At EarCandy, we fire 6mm staples from a Bostich stapler into our grill frames.

Is there any tips or secrets to getting the cloth on right?

There are a few things,

1. Actual shades may vary depending on the color of the panel behind the cloth.


2. Have plenty of light so you can line up your cloth pattern lines with your grill frame edges.


3. Make sure your grill frame is square by checking your diagonals***


4. Start on the short end of your frame and staple that end down.


5. Go to the opposite end, and massage the cloth over the edges so it
   starts to take on the correct shape before you staple that side.


6. Once you have the cloth trained to curl around the edge, pull it taught.


7. Make sure the horizontal lines in the cloth pattern are perfectly parallel with the horizontal edges of your grill frame.


8. Staple the opposite end down.


9. Repeat the same process for the horizontal attachment.

*** Measuring diagonals is simply measuring from corner to corner,
diagonally (upper left to lower right  upper right to lower left).
Those 2 distances must be identical or your frame is out of square and
could cause problems when trying to make your cloth lines all square and
parallel.

Be Cautious of grill cloth offerings where the Dimensions are less than 36x36 as that is how it is manufactured and any less than that is obtained from a remnant sale.

Please feel free to contact us with any questions through Reverb

Thank you to Reverb and thank you for checking us out.