Paul Reed Smith PRS SE SVN 2017 Black Cherry

EDIT: I added new pictures showing off the pickup placements. I realized I forgot to re-install 2 pickup screws on the bridge pickup, but they're properly installed now. I also included pictures of the pickup routing and "fixes" on the Duncan pickups. 

EDIT2: WIlling to dock $50 off if you want just the stock pickups.

This is being sold as-is! Priced to sell!!!

Selling my PRS SE SVN. My last ditch effort to see if I gelled with 7-strings, but I just don't I much prefer baritone 6-strings, so my loss is your gain. 

It's been used quite a bit, so there's some buckle rash on the back in. And there's a scratch next to the neck heel, a small deep screatch along the lower horn, and some smaller, less-deep scratches between the pickups and around the upper-bout of the body of the guitar. As I said, this guitar was heavily used, so it's seen some decent wear.

The stock pickups were replaced with a set of Duncan Nazgul/Sentient pickups, which sound great and are splitable with the 2nd knob. On top of that, the tone knob was re-wired to be a neck volume, so the controls are now bridge vol and neck vol, instead of master vol and master tone. 

There was some mods done to the guitar. The pickup routes were (not so cleanly) expanded to fit covered pickups, but the pickup rings cover the routes up properly. (THS BEARS REPEATING THAT YOU CAN ONLY NOTICE THE ROUTES IF YOU TAKE OFF THE PICKUP RINGS!!!) On top of that, the Nazgul/Sentient set I was given was modded to be direct-mount, so I super glued and soldered on some brass screws to make them work with pickup rings. It wasn't the cleanest job, but they are on properly. 

Will ship with a PRS SE gig bag!