Similar Listings

$5,495
$3,195
Estimated ship date: December 18, 2024
$5,995
$4,750
$3,130.25
$3,295
$3,875
$2,990

This listing is for the following options:
-Manual damper control
-Mono drive (note that all units have stereo output)


UPDATE 4/24/24: All pending and new CVPlate orders will be updated with the latest PlateMic Advanced Damper System for free! Optional PlateMic-style easy access front panels will also be available as a $50 option for those that want to drive/sing/play to the plate directly!


Classic Vintage Pro Audio is taking another pre-order for the updated CVPlate-MM!

Please check the estimated ship date found under the "Pre-Order" button on the upper right - order now to secure your place in line; the wait will only get longer as more units sell out.

Here are the new CVPlate-MM features for 2022/2023:

-Fully engraved front and back faceplates just like the flagship CVPlate-T tube models!

-All new main audio board with multiple transformer options (US-made transformers stock) and lower noise floor.

-Vastly improved suspension system allows for fast & easy single-bolt lockdown (for shipping prep) accessible from tool-less quick access side panel.

-Externally accessible voltage calibration trim with standard 2mm test points allows for easy service and preventative maintenance checks.

Plate descriptions:

Brass C260 - The brightest sounding plate of the selection and the most versatile; really easy to mix with. Bright highs, warm mids, full lows. Long high-freq. decay time. A CVPA personal favorite. Max 500hz decay time: 6.3s

Pure Nickel (+$800USD) - This high-end option has the most natural/smooth sounding reverb tail in my opinion. A little darker than Brass with less high-freq. decay, but slightly better response compared with CRS. Less resonant compared with CRS.  Max 500hz decay time: 4.5s

Cold Rolled Steel (CRS) - The most artificial "metallic" sounding of the selection; for those who want a unique plate with character. Resonant & bright. Medium high-freq. decay time.Max 500hz decay time: 4.5s

Stainless Steel - Just a hint of a metallic sound, but still very natural sounding. Superior oxidation resistance and plate strength.  Very short high-freq. decay time; may not be suitable for high-freq. instruments, but great for snare and instruments in the lower freq. range.  Max 500hz decay time: 4s

Standard features:

-Your choice of plate - choose either Brass, Stainless Steel, or Cold Rolled Steel for free (pure Nickel is +800USD).

-US-made full audio bandwidth input and output transformers.

-Tough, high-quality circuit boards w/wide copper traces and high-end connectors throughout.

-2520-style discrete opamp pin/socket footprint supports a selection of opamps from CVPA and many others* (*3rd party opamps pending tests). Customize your sound and easily service the unit down the road.

-Upgraded external & internal power supplies

-Super-tough powder-coated panels with engraved labeling.

Audio Demo and Samples:

Check out the YouTube samples of the CVPlate-T for a quick idea of what the CVPlate sounds like - for more in-depth sound samples of the solid state and tube versions, please send me a message for links to the uncompressed WAV files of the latest Brass C260, Nickel, and CRS CVPlate. More plate samples to come!

Prices (UPDATED 7/11/2022):
(note that even mono drive still has stereo output):
CVPlate-MM manual - mono drive: $4000
CVPlate-MS manual - stereo drive: $4400
CVPlate-MMT manual - mono drive - all-tube: $5000  (NEW)
CVPlate-MST manual - stereo drive - all-tube: $5600  (NEW)
CVPlate-RM remote control - mono drive: $5000
CVPlate-RS remote control - stereo drive: $5400
CVPlate-RMT remote control - mono drive - all-tube: $6000  (NEW)
CVPlate-RST remote control - stereo drive - all-tube: $6600  (NEW)

Solid state version only:
Germanium hybrid opamps: +$200/opamp (4 max) - (Subject to availability of germ. parts)
CV4 classic opamps: +$80/opamp (4 max)

Sales tax remitted by Reverb.com where applicable.

Controls, switches, connectors:

Side:
Manual decay time adjustment slider using quiet high-end silicone-damped Misumi bushings and shafts.

Front:

Standard 2mm output drive test points

Driver High Cut 4-pos rotary switch - Min, 4kHz, 2kHz, 1kHz

Driver Low Cut 4-pos rotary switch - Min, 90Hz, 180Hz, 360Hz

Driver Low Cut 4-pos rotary switch - Min, 60Hz, 120Hz, 240Hz  

Driver gain trim x 2

Pickup gain trim x 2

2 x Driver output limiter indicator/clip LED's

2 x Power monitoring LED's

Transformer balanced XLR in and out

Rear:

2mm voltage test points x 3

Voltage adjust trim x 2

Bipolar DC power connector

Condition: Small scratches/scrapes/imperfections throughout - common to custom hand-made & thoroughly tested items.

Special considerations: The CVPlate should be located in a quiet equipment room, closet, or humidity/temp controlled basement for best isolation from vibrations and noise. The unit must be kept away from strong sources of RFI (high powered WiFi router) or EMR (power transformers, electric motors, microwaves, etc.).

NOTE: The design of the CVPlate will be constantly improved as new units ship out - current specifications/cosmetics may change from the unit pictured.

Payment info: All pre-order deposits/payments are non-refundable.


Shipping info and return policy:
Given the increasing costs of shipping, I cannot offer returns - so please consider all CVPlate sales/pre-orders to be final.

Please be sure to ask all questions before purchase - I'd be happy to help!

Worldwide shipping with full insurance at buyer expense - I've shipped high-end vintage pro audio gear to studios and individuals all over the world.

International customers:
-Please research your import duty & tax costs before purchase - these charges can be expensive and are non-refundable! This will ship under customs HS Code: 8518.40.2000

-Power supply is externally switchable for worldwide 120/240VAC operation. Please contact me for a shipping quote before purchase!

The packaged dimensions & weights for the CVPlate are:
37" x 25" x 13" - 60lbs ( CVPlate-M & R main plate unit)
24" x 12" x 06" - 10.9lbs (CVPlate-R remote & PS)
12" x 08" x 05" - 5lbs ( CVPlate-M power supply)

The un-packaged dimensions & weights for the CVPlate are:
34" x 22" x 11" - 42lbs (main plate unit)
07" x 04" x 03" - 4lbs (power supply unit)

Feedback policy: I leave feedback after receiving feedback from the buyer.

Thanks for looking!
-Richard
Classic Vintage Pro Audio (CVPA)

Reverb Buyer Protection

Reverb has your back if your item is lost, damaged, or doesn't match its description. Simply report any issues within 7 days and we'll help you get a full refund.Learn more about Reverb Buyer Protection.

ConditionBrand New (New)
Brand New items are sold by an authorized dealer or original builder and include all original packaging.Learn more
Brand
  • CVPA
Model
  • CVPlate-MM
Finish
  • Grey
Categories
Year
  • 2024
Made In
  • United States

CVPA Classic Vintage Pro Audio

Ozark, AL, United States
Sales:163
Joined Reverb:2015

Reverb Gives

Your purchases help youth music programs get the gear they need to make music.

Carbon-Offset Shipping

Your purchases also help protect forests, including trees traditionally used to make instruments.

Oops, looks like you forgot something. Please check the fields highlighted in red.