Saturnworks Active 3-Way Splitter Pedal for Guitar or Bass - Handcrafted in California

Split your signal up to four ways without tone or level loss.

The Saturnworks 3-way active splitter uses three separate buffers, one for each output, to ensure that the signal on each of the three outputs is strong and clear. The active splitter has levels interaction between channels - meaning that you can turn each of the channels down or off without affecting the others. The 3-way splitter can also be used as a 2-way splitter, with the extra capacity there if you need it.

The 3-way splitter can also be set up specifcially for bass. If you would like the bass setup, simply send a message after you check out requesting the bass setup.

The Saturnworks 3-way active splitter is loaded with boutique grade parts and features including:

• A sturdy 4.6” x 2.6” (1590B enclosure) cast aluminum enclosure.
• An input impedance of 1M and an output impedance of < 100 ohms. 
• Heavy duty 1/4” TS Neutrik jacks. 
• Runs on standard 9v DC center negative pedal power with a current draw of around 15mA.
• A top quality Lumberg brand power jack. 
• High quality wire made in the USA. 
• Handcrafted and bench-tested in California, USA. 
• A 1-year limited warranty against defects in parts and workmanship. See saturnworkspedals.com for warranty terms and conditions.

Please note: The pedal in the listing is a stock photo and not the actual pedal you will receive. The pedal you receive may vary in its graphic and/or LED. 

Check out saturnworkspedals.com for the full Saturnworks lineup.