Voltage controlled clock divider, counter, and delay, and can be used to "shuffle" or add Swing to a straight clock.

The functions of logoi are split with division on the left, and addition on the right. The right side operates either in counter mode, by adding clocks, or shuffle mode, by adding a time delay. the mode is set by the centre switch.

The module has CV inputs and trigger outputs for each side, and a combined trigger output (centre bottom jack) which gives the output of both operations; divide and add.

The trigger input (bottom left and right jacks) is shared between division and addition. There is also a reset input (centre top) and manual reset switch (push switch up).

There are three leds indicating the divided and added output to the left and right, and the combined output in the centre.


The divider toggles its output every n clocks, where n is the divisor. the divisor is set with a manual (top knob) and cv level control, in a range from 1 to 32


With the switch in the down position, the additive side functions as clock counter. the counter will output a trigger signal every m clocks, where m is the addend. the range is from 1 to 32 clocks, with 16 in the centre position.

The combined output will divide and count. if i is the incoming clock, n the divisor, and m the addend, then it will output a a trigger signal every i/n + m clocks.

Note that when the addend is larger than the divisor, in other words, n < m, then the divider frequency is higher than the addition and the combined output will never trigger.


With the switch in the centre position, the right side adds a time delay to the input. the amount of delay, or shuffle, ranges from 0ms to around 1000ms.

In shuffle mode, the combined output passes all clocks through until each time the divisor triggers, when it adds a time delay. The result is that every n-th clock is delayed by m, where m is the amount of shuffle and n is the divisor.

As in count mode, if the divisor frequency is greater than the delay time, the combined output will not trigger. in shuffle mode, this is determined by the combination of input clock frequency and delay time.

Specifications: 10HP
15 mA +12V
10 mA -12V
25 mA 5V
30 mm deep

Product Specs

Brand New (New)
Rebel Technology
Logoi - VC Clock Divider and Delay

About The Seller

Midwest Modular
Joined May 2017
Minneapolis, MN, United States


Accepted Payment Methods

Shipping Policy

Ships from Minneapolis, MN, United States to:

Continental U.S.
United Kingdom
Everywhere Else

I will ship with tracking to the listed regions. To negotiate shipping rates to other locations, please send me a message.

Tax Policies

This shop collects taxes in the following regions:

District of Columbia*
New Jersey*
New Mexico*
New York*
South Carolina*
South Dakota*
West Virginia*
*State sales tax is required in this region. Learn More

Return Policy

Return Window

This product can be returned within 14 days of receipt.

General Terms

Items must be returned in original, as-shipped condition with all original packaging and no signs of use. Buyer assumes responsibility for all return shipping costs unless the item was not received as described.


Buyer receives a full refund in their original payment method less any shipping costs and a 15% restocking fee.

Special Conditions

"New/Mint" condition items returned (excluding defective items or items not as described) will be inspected and tested upon return to the shop, and if they are not returned in New/Mint condition (due to broken seals on packaging or minor signs of use like rack rash or scratches) and are no longer able to be sold as "New/Mint" a fee will be assessed for the difference between it's new price to it's estimated resale value, up to a maximum of 15% plus shipping costs.

Message Seller

Accepted Payment Methods

Credit Card
Reverb Bucks

As low as $22/month

Midwest Modular

Minneapolis, MN, United States
Joined: May 2017

Seller Achievements

Rebel Technology LOGOI - Eurorack VC Clock Divider and Trigger Delay Module
+ Free Shipping