The Mod 10-50 is a 10" ferrite speaker with 50 watts of power. Warm, straightforward tone and tight bass frequencies. When presented with overdrive distortion, it exhibits a colorful fuzz edge.
Guitarist Description: Warm, straightforward tone and tight bass frequencies.When presented with overdrive distortion, it exhibits a colorful fuzz edge.
Bassist Description: Full
- Lows: Tight
- Mids: Subdued
- Highs: Smooth
- Overdrive: Edgy
Product MeasurementsDiameter: 10 in.
Voice Coil Diameter: 1.25 in.
Depth: 3.8779 in.
Outer Diameter: 10.1969 in.
Inner Diameter: 9.0944 in.
Mounting Hole Bolt Circle Diameter: 9.6456 in.
Magnet Assembly Diameter: 4.0157 in.
Mounting Hole Diameter: 0.2559 in.
Nominal Overall Diameter: 259.00 mm
Nominal Voice Coil Diameter: 32.00 mm
Flux Density: 1.10 T
Magnet Type: Ferrite
Voice Coil Winding Type: Copper
Voice Coil Former: Epotex
Cone Material: Paper
Surround Material: Integrated Paper
Dust Dome Material: Non-treated Cloth
Basket Material: Pressed Sheet Steel
Voice Coil DC Resistance (Re): 3.08 Ω
Resonance Frequency (ƒS): 101.60 Hz
Mechanical Q Factor (QMS): 16.16
Total Q Factor (QTS): 1.24
Mechanical Moving Mass (MMS): 18.10 g
Mechanical Compliance (CMS): 135.00 µm/N
Force Factor (BxL): 5.16 Wb/m
Equivalent Acoustic Volume (VAS): 207.8 liters
Linear Displacement, maximum (XMAX): 2.00 mm
Reference Efficiency (nO): 1.56 %
Diaphragm Area (SD): 330.10 cm2
Losses Electrical Resistance (RES): 37.20 Ω
Voice Coil Inductance @ 1 kHZ (LE): 0.39 mH
Rated Power: 50.00 W
Musical Power: 100.00 W
Sensitivity @ 1W, 1m: 95.10 dB