Brooklyn, NY, United States
About this listing
10" Replacement Speaker (8-ohm)Features
Nominal diameter : 254mm / 10in
Power rating : 150W
Continuous power rating : 300W
EIA power rating : 250W
Rated impedance : 8O
Sensitivity : 97dB
Frequency range : 60-5500Hz
Chassis type : Pressed steel
Magnet type : Ferrite
Voice coil diameter : 50mm / 2in
Voice coil material : Round copper
Former material : Polyimide
Cone material : Kevlar loaded paper
Surround material : Cloth-sealed
Suspension : Single
Gap height (Hg) : 8mm / 0.31in
VC winding height (Hvc) : 12mm / 0.47in
Additional impedances : 4O
Parameters
Sd : 346.36cm2 / 53.69in2
Fs : 69.40Hz
Mms : 31.10g / 1.10oz
Qms : 2.454
Qes : 0.372
Qts : 0.323
Re : 5.45O
Vas : 28.75l / 1.02ft3
BI : 14.10Tm
Cms : 0.17mm/N
Le (at 1kHz) : 0.60mH
Xmax : 4mm / 0.16in
Mounting Information
Overall diameter : 256mm / 10.08in
Overall depth : 110mm / 4.3in
Cut-out diameter : 229mm / 9.02in
Mounting hole dimensions : 8x6mm / 0.31x0.24in
Number of mounting holes : 4
Mounting hole PCD : 245mm / 9.65in
Power rating : Tested for two hours using a continuous, band-limited pink noise signal as per AES standard. Power is calculated on minimum impedance. Loudspeaker tested in free air.
Continuous power rating : Defined as 3dB greater than the AES rating.
Sensitivity : Measured on axis at 1W, 1m in 2p anechoic environment.
Parameters : Measured after unit subjected to pre-conditioning signal.
Xmax : 0.5(Hvc-Hg) + 0.25Hg
Price$84.50
Free Shipping
Free Shipping
from Brooklyn, NY
Only 1 left
Grab it before it's gone
30-Day Return Policy
Enjoy peace of mind with your new gear




