Behringer PMH2000 Europower 2 x 250W Stereo Powered 10 Ch Mixer w/Manual

  The Behringer PMH2000 Europower Powered Mixer is packed with features that are great for live gigs. The PMH2000 gives you 6 mono channels with ULN mic/line preamps with -25dB pads and peak LEDs, switchable phantom power, super-musical 3-band EQ, plus independent effects and monitor sends. In addition, you get 4 stereo channels: 3 with the same ULN mic/line preamps, EQ, and sends, but with left and right 1/4" connectors, plus one channel especially configured for tape, CD, or MD players with stereo RCA inputs and recording outputs.

The PMH2000 also features a built-in 2 x 250W stereo power amplifier and a flexible master section, including 2 - 9-band graphic equalizers that can be assigned to left and right main mix or to main mix and monitor out, augmented by a switchable low-cut filter for channels 1-6. Both graphic EQs feature an in/out switch for quick comparisons or bypassing. Power amp inputs are available for connecting external mixers or sound sources, and there are 3 preamp outputs for added flexibility. A footswitch connector allows you to remotely bypass the effects section with a standard footswitch.

The main and monitor sections each feature individual level controls, a 5-segment LED level meter, and a master effects send level control. In addition, the integrated limiter offers effective protection against speaker overloads.

Last but not least, the PMH2000 sports a 24-bit effects unit based on Behringer's Virtualizer Pro and Modulizer Pro effects processors. It delivers 99 great-sounding presets ranging from standard reverb and delay to more unusual algorithms like Vinylizer, Magic Pitch, Vocal Distortion, and Space Radio. All of this power and potential is enclosed in a compact, rugged enclosure with tough vinyl covering, high-impact protective corners, and a practical handle. Make it yours today!
FEATURES

• 250W stereo amp
• 6 mono mic channels with 3-band EQ, phantom power, effects sends, and monitor sends
• 4 stereo channels with EQ and sends
• Preamp outs
• Dual 24-bit effects processors
• Master graphic EQs

SPECIFICATIONS

PMH2000 Europower Powered Mixer

• Mic inputs-
• Type: balanced XLR
• EIN (20Hz-20kHz)-
• 0 OHM source resistance: -122db/125dB A-weighted
• 50 OHM source resistance: -122db/125dB A-weighted
• 150 OHM source resistance: -121db/124dB A-weighted
• Frequency response-
• -1dB: <10Hz-100kHz
• -3dB: <10Hz - >200kHz
• Gain: +33dB; +8dB with pad
• Max input level: +12dBu @ 8dB gain
• Impedance: approx. 2.2k OHM balanced/ 1.1k OHM unbalanced
• Signal-to-noise: 110dB; 114dB A-weighted (-11dBu in @ +33dB gain)
• Distortion: 0.001%; 0.0008% A-weighted
•  
• Mono line inputs-
• Type: balanced 1/4" TRS
• Impedance: approx. 80k OHM balanced/ 40k OHM unbalanced
• Max input level: +30dBu
•  
• Stereo line inputs-
• Type: unbalanced 1/4" TRS
• Impedance: approx. 40k OHM unbalanced
• Max input level: +28dBu
•  
• EQ-
• Low: 60Hz, +/- 15dB
• Mid: 700Hz, +/- 15dB
• High: 6kHz, +/- 15dB
•  
• preamp outputs-
• Type: unbalanced 1/4" TRS
• Impedance: approx. 1.5k OHM
• Max output level: +21dBu
•  
• Power amp inputs-
• Type: unbalanced 1/4" TRS
• Impedance: approx. 47k OHM
• Max imput level: +21dBu
•  
• DSP-
• Converters: 24-bit TI and Sigma Delta, 64/128X oversampling
• Sampling rate: 46.875kHz
•  
• Noise-
• Main mix@-inf, channel fader @-inf: -76dB/-80dB A-weighted
• Main mix@0dB, channel fader @-inf: -72dB/-76dB A-weighted
• Main mix@0dB, channel fader @0dB: -71dB/-75dB A-weighted
•  
• Power amp
• Output-
• Stereo mode: 250 watts into 4 OHM; 180 watts into 8 OHM
• Bridged mono mode: 500 watts into 8 OHM
•  
• Loudspeaker-
• Connector: Neutrik Speakon
• Load impedance-
• Left/monitor: 4/8/16 OHM
• Right/mono main: 4/8/16 OHM
• Bridged: 8/16 OHM
•  
• Power supply: 120V/60Hz
• Power consumption: max 1kW
• Fuse: T 10 A
• Plug: standard IEC
• Dimensions: 18-1/8"W x 11"H x 10-5/8"D
• Weight: 33 lbs.