Santa Fe Springs, CA, United States
About this listing
Wireless Receiver Note: When purchasing separate wireless components, please match their frequency bands to ensure proper system operation. The Shure ULXD4D Dual Channel Digital Wireless Receiver offers two channels of uncompromising audio quality, RF signal stability and efficiency, and advanced setup features in a single rack unit. Rugged, yet lightweight and compact, the all-metal chassis houses two independent receivers, each with its own audio and RF meters, gain control, and receiver outputs that can be either direct or summed for flexible signal routing. With RF cascade and two Ethernet ports, units easily can share RF signal and be networked together for simplified frequency coordination and deployment. For networked audio applications, Dante digital networking allows multiple channels of audio to be transmitted and received over a single Ethernet cable. When more compatible frequencies over shorter distances, High Density mode can be enabled to dramatically increase the number of available open frequencies. With the suite of features and benefits ULX-D Digital Wireless Systems offer, the ULXD4D is truly generations ahead of any other dual digital receiver in its class, and brings a new level of performance to professional sound reinforcement. Key Features Two receivers in a rugged 1RU metal chassis with internal power supply Individual gain controls, LED meters, and XLR outputs for each channel Up to 64 MHz tuning range (region dependent) Digital predictive switching diversity High Density mode optimizes ULX-D systems to simultaneously operate significantly more channels in applications up to 30 meters RF cascade ports allow distribution of RF signal to another unit Optimized scanning automatically finds, prioritizes, and deploys the cleanest frequencies to transmitters over IR sync Bodypack frequency diversity ensures uninterrupted audio for mission-critical applications AES 256-bit encryption-enabled for secure transmission Audio summing routes both audio channels to each XLR receiver output Dante digital networked audio over Ethernet Up to 60 dB independently adjustable gain for each channel Ethernet networking for streamlined frequency coordination and deployment across multiple receivers Wireless Workbench 6 (WWB6) software integration for advanced coordination, monitoring, and control Interference detection and alerts provided on both the receiver and WWB6 AMX/Crestron control AXT600 Axient Spectrum Manager compatible Yamaha device ID allows simplified channel patching on CL consoles Intuitive front panel LCD menu and controls with lockout feature Audio and RF LED meters with peak indicator XLR connectors with switchable mic/line output level Remoteable 1/2 wave antennas Technical Specifications Frequency Band H50: (64 MHz) 534 – 598 MHz Housing steel; Extruded Aluminum Power Requirements 100 to 240 V AC, 50-60 Hz, 0.26 A max [RF Input] Spurious Rejection >80 dB, typical Connector Type BNC Impedance 50 ohm Bias Voltage 12 to 13 V DC, 150 mA maximum, per antenna switchable on-off [Cascade Output] Connector Type BNC Note: For connection of one additional receiver in the same band Configuration Unbalanced, passive Impedance 50 ohm Insertion Loss 0 dB [Audio Output] Gain Adjustment Range −18 to +42 dB in 1 dB steps (plus Mute setting) Configuration XLR balanced (1=ground, 2=audio +, 3=audio −) Impedance 100 ohm Full Scale Output LINE setting: +18 dBV MIC setting: −12 dBV Mic/Line Switch 30 dB pad Phantom Power Protection Yes [Networking] Network Interface Dual Port Ethernet 10/100 Mbps, 1Gbps, Dante Digital Audio Network Addressing Capability DHCP or Manual IP address Maximum Cable Length 100 m (328 ft) Dimensions 44 x 482 x 274 mm (HxWxD) Weight 3.36 kg (7.4 lbs), without antennas
Price$3,387
Free Shipping
Free Shipping
from Santa Fe Springs, CA
Only 1 left
Grab it before it's gone
14-Day Return Policy
Enjoy peace of mind with your new gear
