Dimensions

121 x 64 x 57 mm (4.75 x 2.50 x 2.25 inches) with knobs

Current Draw

75 mA

Input Impedance

500 kΩ

Output Impedance

100 Ω

TRS Expression Pedal Wiring

Tip: Wiper

Ring: +3.3 V

Sleeve: Ground

Flexi-Switch® Technology

This device features Flexi-Switch® technology! This relay-based true bypass switching system allows you to use momentary and latching switching simultaneously.

• For standard latching operation, press the footswitch once to activate the effect and then press it again to bypass it.

• For momentary operation, hold the footswitch down for as long as desired. Once you release the footswitch, the effect will be bypassed.

Since switching is relay-based, it requires power to transmit the signal.

Power Supply

This device uses a standard 9-volt DC power supply with a 2.1mm negative center barrel. We always recommend transformer-isolated wall power supplies specifically designed for pedals or power supplies with multiple isolated outputs. Pedals will produce additional noise if there is ripple or dirty power. Switching power supplies, daisy-chain power supplies, and non-pedal-specific power supplies do not filter dirty power well and allow unwanted noise to pass through. DO NOT USE AT HIGHER VOLTAGES!