• High-end DI-out to the FOH system
• 4 onboard effects: short reverb, long reverb, delay, chorus
  The effect can be added to each channel via a PAN control.
• 7 kg light weight, transportable in all public transports and also as hand luggage on airplanes.
• Independent 3/2-band EQ
• All AER amplifiers are delivered with a high quality padded gigbag.

Two independent channels for instrument and z. B. high quality condenser microphones.

Channel 2 provides 48-V phantom power.
For channel 1, 9 V phantom power can be switched on in order to supply your pickup system with the required voltage.

A customized 8 “twin cone loudspeaker and 60 watts RMS output power, sufficient to dynamically and powerfully amplify your instrument in every rehearsal room and on club stages.

TECHNICAL SPECIFICATIONS

• Channel 1
  6.3 mm (1/4”) input jack socket
  as high impedance line input stage with pad (high/low
  attenuation) 9 V phantom power
  and gain control
• Channel 2
  combined XLR/6.3 mm (1/4”) input jack socket as high quality line or balanced microphone input stage 48 V, gain control
• Equalizer
  three band tone controls for channel 1 and
  two band tone controls for channel 2
• Colour
  ‘mid-cut-treble-boost’-filter
• Digital effect processor with 4 presets:
  2 x reverb, delay, chorus
• Power amp
  60W / 4 ohms, dynamic control
• Speaker system
  8” (200 mm) twin cone speaker
• Features
  headphones, line out, switchable DI-out,
  external effect loop via send and
  return, footswitch, aux in
  (internal/external effect on/off )
• Dimensions
  260 mm x 325 mm x 235 mm
  (10.20“ x 12.80“ x 9.25“), HxWxD
• Weight
  7.1 kg (15.6 lbs)