CLOSEOUT AweSome Mustang Bass PJ Upgrade Gives You 21 BASS Pickup Tones

Want MORE Pickup Tones from your
Mustang Bass PJ?
Looking For Your Signature Sound?
This Is Exactly What You Want!

*** THIS IS A CLOSEOUT ITEM ***

Want MORE From Your Bass?

Thank you for looking at our incredible upgrades for your electric guitar and bass that will give you the Ultimate in pickup tone control.

Now you can Soup Up your Mustang Bass PJ (or similar bass with PJ pickups) to get more pickup tone power and also increase your creativity and versatility. Our high performance upgrade gives you the ultimate performance at the lowest cost.

Product Description

This upgrade uses our T3PJ-Switch to give you 21 Pure Analog pickup tones on your Mustang Bass PJ (or similar clone) with a PJ pickup configuration. It comes with everything you need to install this upgrade into your Mustang Bass PJ.

You Get MORE

You get the following upgrade.

T3PJ Custom Upgrade for your Mustang Bass PJ to give you 21 pickup tones

This versatile upgrade gives you incredible pickup tone power.

Now you can totally control your pickups. Turn each pickup ON in either normal-phase or reverse-phase. Put them in parallel-connection or series-connection. Get 21 pickup tones from your upgraded Player Jaguar Bass – instead of the three pickup tones that you currently have. On stage or in the studio; this upgrade is your ultimate secret weapon.

Here are the simple steps to install this product.

You should know that simple pickup rewiring is needed with this upgrade. You will cut the wire that connects the two P coils and attach extra wire (included with the upgrade) using the provided solderless terminal connectors. This separates the P pickup into two separate pickup coils. Use an ohmmeter to confirm that the wires connected to the pickups read continuity. Once rewiring is completed;

• You connect your rewired pickups to the green solderless terminal strip
• You connect your bridge ground wire to the output jack ground wire
• You re-attach the upgrade and start exploring the 21 pickup tones now available to you.

Using This Upgrade

This upgrade uses our T3PJ-Switch.

How The T3PJ-Switch Works

The T3PJ-Switch contains five mini-toggle switches (from rear-to-front): (SW1; SW4; SW2; SW5; SW3) (see the included picture)

These mini-toggle switches are used to control the Bridge (J / coil-1) pickup; and the Middle / Neck (P / coil-2 and coil-3) pickup coils that have been rewired by you.

SW1 is an ON-OFF-ON switch used to turn the Bridge J (Jazz Bass) pickup coil-1 Off and On. The middle position of this switch is Off. The Down position turns the pickup On (in normal-phase) and the Up position turns the pickup on (in reverse-phase).

SW4 is an ON-ON switch used to put the Bridge J and P pickup coils in either a Parallel connection or Series Connection. Down is Parallel; and Up is Series. When Down; the J pickup (coil-1) or the P pickup coils (coil-2 and coil-3) can be turned On — either separately or together. When Up; both PJ pickup coils MUST be in an On position (see SW1 and SW2) or no sound will be produced.

SW2 is an ON-OFF-ON switch used to put the P pickup coils (coil-2 and coil-3) On. THe middle position of this switch is Off. The Down position turns the P pickup coils On. When Down; the P  pickup coils can be further controlled by SW5 and SW3 using the rules described for these switches. The Up position is non-functional. (if SW4 is Up; this switch must be On)

SW5 is an ON-ON switch used to put the p pickup coils (i.e.; coil-2 and coil-3) in Parallel connection or Series Connection. When Down; the two coils are in Parallel connection. When Up; the two coils are in Series connection.

SW3 is an ON-ON switch used to change the phasing of the P pickup coils (i.e.; coil-2 and coil-3). Down puts the coils in normal-phase and Up position puts the pickup in reverse-phase.

You get 21 pickup tones with this upgrade.

What You Get

You get a completely wired quality acrylic control plate to upgrade your Mustang Bass PJ (and similar clone models). You just connect your rewired pickup wires to the green solderless terminal strip; attach the upgrade to your bass and you're done.

These upgrades come with our T3PJ-Switch; stacked 500K tone and volume control; chrome knobs and high quality .047 mfd mylar tone control capacitor (with a superior linear frequency response) for unequaled versatility to give you 21 pickup tones. Comes with a parts bag with items that you may need to install this product. You get detailed instructions to install and use this upgrade that you download from our website.

This upgrade is simple to install! You remove your existing control plate; connect your rewired pickup wires to a green solderless terminal strip (no soldering needed) — and a HUGE range of additional hidden pickup tones will instantly open up to you.

Tools You Need To Install This Product

You need the following tools (not supplied with purchase). Purchaser assumes all risk of liability with respect to the purchase; installation and use of this product.

• Wire cutters / wire strippers
• 5/64 inch (2mm) hex (allen) wrench for volume/tone knob set screws
• Small pliers
• Small phillips screwdriver; small straight slot screwdriver
• Multimeter with ohmmeter function
  
• Soldering iron (30 watt maximum); 60/40 rosin core solder
  

Returns
This is a Closeout Item. No returns are possible.

Get This Upgrade Now!