dpFX Pedals - Isolated ABY Switcher (active, buffered)

"dpFX pedals" builds handmade, hand-painted pedals and custom effects (dpeffects.com). All products are serial numbered.

-- This is the Isolated ABY Switcher (active, buffered) --

Description:
This ABY Switcher (suitable both for bass & guitar) offers two equal outputs A,B.
Output-B is isolated using an audio transformer in order to help you avoid ground loops when using two amps simoultaneously. The isolation is applied when the Ground Lift switch is engaged. To avoid phasing problems when using two amps there is also a Phase Reverse switch (0° /180°) available for output-B which reverses the phase of your signal if required.

The A/B-footswitch allows you to choose your active output (A or B) while the Y-footswitch when engaged it activates both outputs at once. The switching between channels is totally silent and pop-free.
The input stage is buffered with high impedance ICs in order to pick up your instrument's signal the best way possible without affecting your tone.
The audio trasformer has a flat response from 20Hz up to 20kHz so that it doesn't distort your signal. Output is also buffered and the output impedance is very low in order to suitably drive any amp or similar device.

- Voltage Required: DC 9-24 Volt (using 12-24V gives you more headroom)
- Polarity: Negative tip
- Max Current draw: 5mA @ 9V
- Input impedance: 10MΩ
- Output impedance: 100Ω
- Enclosure Dimensions: 112 x 60 x 32 mm (4.41 x 2.38 x 1.22 in)
- Weight: ~230gr

Shipping method: via Registered Mail (tracking number provided). If you want a faster shipping method please message me before ordering so that I can give you new shipping rates.