Santa Fe Springs, CA, United States
About this listing
The rack-mountable, 12-Input RX1202FX mixer enables you to effortlessly achieve premium-quality sound, thanks to 8 onboard studio-grade XENYX Mic Preamps, 2 stereo Line Inputs and ultra-musical “British†channel EQs. Add to this our 24-Bit Multi-FX processor with 100 awesome presets including studio-class reverbs, delays, pitch shifter and various multi-effects and the RX1202FX becomes an incredibly-versatile mixer for your live performances. Ideally suited for musicians, houses of worship and a wide variety of business applications, the incredible RX1202FX is also perfect for sub-mixing keyboards, drums or multiple vocal mics and is an absolute “must-have†for monitoring your multitrack recording projects! Sonically Superior Mic Preamps Our legendary, high headroom XENYX mic preamps have been praised by audio engineers all over the world. These state-of-the-art mic pres represent a major step in the evolution of audio technology and they can easily hold their own, even when compared to the most expensive stand-alone mic preamps. XENYX preamps off er a staggering 130 dB of dynamic range, with a bandwidth that extends from below 10 Hz to well above 200 kHz. Armed with these outstanding mic preamps, the RX1202FX provides such transparent, crystal-clear performance you just might think someone upgraded your mics while you weren’t looking. Sublimely Musical British EQ The British consoles of the 1960s and ‘70s changed the sound of rock and roll without them the British Invasion might not have happened. Those legendary mixing desks soon became the envy of engineers and producers all over the world. The channel EQ on our RX1202FX mixer is based on that very same circuitry, allowing you to imbue signals with incredible warmth and detailed musical character. Even when applied generously, these equalizers exhibit sweet forgiveness and superb audio quality. Key Features Premium ultra-low noise, high headroom analog 3U rack mount mixer 8 state-of-the-art XENYX Mic Preamps comparable to stand-alone boutique preamps Neo-classic "British" 2-band EQs for warm and musical sound Studio-grade FX processor with 100 awesome presets including reverb, chorus, flanger, delay, pitch shifter and various multi-effects Switchable +48 V phantom power for condenser microphones 4 additional balanced high-headroom line inputs CD/Tape inputs assignable to Main mix or Control Room/Phones outputs 2 Aux sends per channel: 1 pre fader for monitoring applications, 1 post fader for internal FX or as external send Separate Control Room, Phones and stereo CD/tape outputs Balanced Main mix outputs with gold-plated XLR connectors Long-wearing 60-mm logarithmic-taper faders and sealed rotary controls "Planet Earth" switching power supply for maximum flexibility (100 - 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving Technical Specifications Mic inputs Type: XLR, electronically balanced Impedance: 2.6 k OHM balanced Max. input level: +12 dBu @ +10 dB gain Gain range: +10 to +60 dB Signal-to-noise ratio: -110 dB / -112 dB A-weighted Distortion (THD + N): 0.003%, A-weighted Line inputs Type: 1/4" TRS connector, electronically balanced Impedance: 20 k OHM balanced, 10 k OHM unbalanced Gain range: -10 to +40 dB Max. input level: +22 dBu @ 0 dB gain Auxiliary inputs Type: RCA connectors, unbalanced Impedance: 20 k OHM Max. input level: +22 dBu Insert 1/4" TRS connector (tip = send, ring = return) Aux return Type: 1/4" TRS connector, balanced Impedance: 20 k OHM balanced, 10 k OHM unbalanced Max. input level: +22 dBu Main out Type: XLR connectors, balanced Impedance: 240 OHM balanced, 120 OHM unbalanced Max. output level: +28 dBu balanced, +22 dBu unbalanced Ctrl out Type: 1/4" TRS connector, impedance balanced Impedance: 240 OHM balanced, 120 OHM unbalanced Max. output level: +22 dBu CD/tape out Type: RCA connectors, unbalanced Impedance: 1 k OHM Max. output level: +22 dBu Phones out Type: 1/4" TRS connector, stereo Max. output level: +19 dBu / 150 OHM (316 mW) Aux send Type: 1/4" TRS connector, impedance balanced Impedance: 240 OHM balanced, 120 OHM unbalanced Max. output level: +22 dBu EQ Low: +/-15 dB @ 100 Hz High: +/-15 dB @ 12 kHz Main mix @ -∞, channel fader @ -∞ -98 dB / -101 dB A-weighted Main mix @ 0 dB, channel fader @ -∞ -85 dB / -88 dB A-weighted Main mix @ 0 dB, channel fader @ 0 dB -77 dB / -80 dB A-weighted Frequency response 20 Hz to 105 kHz, +/-1 dB Crosstalk 90 dB Converter 24-bit Sigma-Delta Frequency rate 40 kHz Presets 100 Switch-mode autorange power supply 100-240 V ~50/60 Hz Power consumption 18 W Mains connection Standard IEC connector Dimensions(H x W x D) 133 x 482 x150 mm (5.2 x19.0 x 5.9") Weight 3.1 kg (6.8 lbs)
Price$269.99
Free Shipping
Free Shipping
from Santa Fe Springs, CA
14-Day Return Policy
Enjoy peace of mind with your new gear
