Roland MPU-101 MIDI-CV Interface with four channels + original manual

MIDI TO CV INTERFACE

The MPU-101 is unique in that it converts MIDI data into analog signals. When the MPU-101 is connected to a MIDI sending unit, a conventional 1 -volt/octave Cv/gate synthesizer such as the SH-1O1, SH-2, or System-100M can be controlled by MIDI data.

Other voltage-controlled devices can also be controlled. For example, you can automatically synchronize lighting equipment with your performance.

The gate signals can also be used as trigger signals to control a percussion sound source like the Boss PC-2 or HC-2, a sampling unit such as the Boss DSD-2, or a digital delay, for example the Boss DE-200.

The MPU-1O1 can expand your MIDI system's potential just as much as your imagination allows.

The MPU-101 has four output channels, each with pitch control voltage, gate signal, and dynamics control signal outputs. Up to four CV synthesizers can be controlled by MIDI data, or you can play polyphonically 4 voices in your modular system if you have at leaast 4 VCOs. There are different play modes to allow you to do that, that's why the MPU-101 is the most sought after midi to CV converter ever.

ln addition to the key information, other MIDI data including velocity, modulation, after touch and volume information is converted into CV analog signals. Complicated MIDI data can completely be converted.

The MID channel can be assigned to one of 1 to 16.

Original owner's manual included.