crucFX Rolz Eurorack Module

This is the last Rolz from the early Prototype phase - it has had a little bit of SMD re-work - but functions just like the Production Units.

ROLZ
Rolz is a series of astable multivibrators that have been designed to create relabi rhythm pulses.
By extending the vanilla freerunning multivibrator with added "neurons" and "capacitor tanks" the oscillations start to generate limping pulses.
These archaic structures in pulse can be interwoven with eachother to create the relabi rhythms that were mentioned before.
3-Rolz and 5-Rolz are unique in the aspect that they create ultrasound bursts within their paradox patterns, try patching these directly to a filter of choice and play around with the freqeuncy and resonance to start pinging the filter, then you can start patching the Sandrode Section of Rolz and you will hear these ultrasound bursts layered within their pulse outputs.
The Even Rolz (4,6, 6, and 4) have LED Indicators for their state.

There are two of each Rolz Geometry present in the Sandrode Section.
These can be patched together with Banana Plugs, Alligator Clips, or you can even use your fingers!
Each Row of Rolz (from Left to Rite) Five, Six, Four, and Three - match their respective postion in the two rows of 3.5mm Jacks in the Pulse Out/CV Out Section.
Each Pulse Output indicates the state of the astable multivibrator by way of a DC Coupled Pulse Output.

There are 3 Sandrode Convertors on the Rolz Module -
You can connect a single Sandrode to the STAR Node below the 3.5mm Ouput Jack.
These convert the negative spikes from the Sandrodes into a usable Positive CV Pulse.

WARNING:
The Sandrode section is not meant to be patched into the Eurorack environment, hence why they are presented in a different format.
Please use the Sandrode Convertors, or the crucFX NODEZ Module if you wish to convert your Sandrodes to Positive CV.

*******************************************************************************************************************
Rolz is a 21hp Module that uses 12v+ and GND (no -12v) and uses a standard 10-pin Eurorack Connector.
This module is Polarity Sensitive, Plugging it into your Supply incorrectly will result in damage.