EMT 140-RK remote control motor with desktop control module for the EMT 140 plate reverb.

For sale this EMT 140-RK remote control motor with desktop control module. This EMT 140-RK is a original EMT product made to "bolt on" to a EMT 140 plate reverb without a internal motor. You can remove the manual wheel on top of your 140 plate and replace it with this motor to turn your manual operated EMT 140 plate in to a motor driven plate. Included with this package is a desktop control module with seconds meter and +/- selection (module is naked it need to be installed by a qualified technician in to a box or flush with the surface of you mixing desk). Connection between the desktop modules and EMT 140-RK motor is via 5 core cable with a pair of 5 pin Canon connectors in the middle, simply add a 5 core cable with your desired length that has male and female 5 pin Canon connector on each end to customise it to your studio setting.

This is a fully wired "plug and play" package that needs only minor technical skills to install. This EMT 140-RK motor is configured to work with 220v but can be set to 110v internally by soldering a jumper to the 110v setting, please consult a qualified technician for setting it to 110v.
This package has been tested in all settings and is fully functional, the remote module has been wired correctly and needs nothing to operate.

Please inspect the pictures for the full story. This a very rare part that will not only free you from the drag of manually operating your plate but it will also increase the value of your plate significantly by turning it in to a motor driven plate.

This packet contains:

1 x EMT 140 RK factory original motor for EMT 140 plate reverb. 
1 x Desktop control module for controlling decay time of your 140 plate.

Pictures are of actual items. Feel free to ask any questions. Import duties are for the buyers account and are not included with buy it now price. Buyers within EU with valid VAT nr contact me prior to purchase for a 0% VAT sale. VAT nr must be checked first and shipping location must match VAT nr's registration. Suitable invoice for your business is available.  

I will ship with Fedex international Economy to the continental USA, EU, Japan, Canada, Australia, Norway and Switzerland. Full value will be declared on customs documents, requests to lower value will be ignored. Shipping to the above mentioned locations only, no exceptions.

Items for sale are not new they are second hand and although the pictures show the product as good as possible please take this in consideration. I do not hand out partial refunds or cover external repair invoices. If you are unable determine the items condition from the photos please ask the Questions before you buy. In case off loss or damage during transportation, then this should be covered by shippers insurance. Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.