ActitioN 4 button plastic USB MIDI controller for PC/Mac/iPad/iphone

Full control for Amplitube, Guitar Rig, Revalver, Ableton Live, any DAW or software which can handle midi!
Turn your favorite guitar amp software into a fully functional multi-effect unit with a volume or wah pedal!

My goal was to create an inexpensive but usable midi footswitch with pedal for wah effect for my favorite guitar effetct software Guitar Rig.
You can connect an external pedal for wah, volume, etc. (not included). Calibration support is inculded!

Plug and play, no driver or installation needed. Just plug it into a free USB slot and your OS will recognize it.
Just enable 'ActitioN MIDI controller' in your software settings and you're ready to go.

Two controller mode: To activate mode 1 press buttons 1&2&3. To activate mode 2 press buttons 2&3&4 (All LEDs will blink for half a second to indicate this).
    Mode 1: Changing presets. The controller sends Program Change (PC) MIDI messages. The LEDs indicates which preset is working.
    I designed this mode for standalone softwares, Amplitube, Guitar Rig, Bias, etc.
                Check the demo videos with Guitar Rig and Amplitube.
    Mode 2: In mode 2 the controller sends Control Change (CC) MIDI messages. It allows you to turn functions/effects on and off individually. The LEDs indicate the state.
      Momentary mode: in mode 2, press a button for 10 seconds to switch to momentary mode. (All LEDs will blink for half a second to indicate this).
                Momentary mode allows you to use non-on/off functions like 'previous/next preset', 'tape deck play' etc. The LEDs do not light up in momentary mode since it's unnecessary.
      I designed this mode for DAWs.

The device saves mode/momentary settings of course.

With these two modes you can use all the functions of your software. Every software works very similar as you can see in the demo video with the 8 button metal version and BIAS FX iPad.
   
External pedal input. You can connect any standard pedal (Roland FV50 for example) with a 6.3mm (¼ inch) stereo jack (TRS).
With external pedal you can control any faders and knobs.
If you can't use the full range of the pedal you may have to calibrate it.
Calibration:  Step 1:turn the pedal to minimum position and press button 1 AND button 3. (All LEDs will blink for half a second to indicate this).
                    Step 2:turn the pedal to maximum position and press button 1 AND button 4. (All LEDs will blink for half a second to indicate this)
                    The device will save the calibration data so you only have to do it once.

This is a USB MIDI controller so works with PC/Mac/iPad/iphone ONLY.

Highly durable still lightweight metal case and buttons, ideal for both practice and on-stage use.

Dimensions:390x90mm
Weight:0,45Kg
USB cable not included.
Sent by registered parcel with tracking number.
If you have any question feel free to contact me.

Tip:
I found a nice, free midi-to-keystroke program (there are a lot of them available if you google it).
It allows to control anything like winamp, audiobook player, videoplayers, office, games, etc.