Aurora Audio Stinger

Absolutely perfect condition. Only sporadical home use.

----------------------------------------------------------------
Stinger is unparalleled in its flexibility and routing. Of course both of the DIs have parallel outputs, but Stinger also has unbalanced and balanced outputs. For example, you can send an EQed signal to an amplifier with the unbalanced output as well as your recorder using the traditional balanced output. You can send an overdriven signal from the Instrument DI BACK into the mic pre, get all that warm EQ and transformer love before you send it to the recorder, PA, or amplifier. You want to eq tracks already recorded? Done. Fuzz out your bass? Done. Got a gig? Use the best preamp in the world for your vocal and the DI for your guitar or keys. Send it out to the PA for all the world to hear. The combinations are only limited by your imagination. The versatility of Stinger is unmatched for a single channel preamp in the analog domain.

Mic/DI PATH

•Gain -10dB to +80dB on the input sensitivity switch +10dB in the fader.

•Input Impedance = 1.2Kohm (XLR I/P), 10Mohm (DI I/P)

•Output Impedance = < 50 ohms balanced

•DI Input Impedance = 10 Mohm

•VU points from -33VU to +24VU in 3dB steps where 0VU = +4dBu = 1.228 vac.
Input headroom = 26 dB
Frequency response = < +/- 1dB at 20Hz and 20KHz ref. 0dBu @ 1KHz

•Noise = +80dB gain = -45dB (EIN = -125dB)/0dB gain = -85dB

•Headroom = Maximum output > +26dBu

•Distortion = < 0.075% @ 1KHz

•Three band EQ = +/- 15dB adjustment 80Hz (Bass), 12KHz (Treble) mid frequencies of 400Hz, 1,600Hz 3,200Hz 18dB

•Low Pass Filter @80 Hz

•Phase Invert

•+48V Phantom Power

INSTRUMENT DI PATH

•Gain +30dB (+10dB with -20dB attenuator selected)

•Input Impedance = 1 Mohm

•Output Impedance :-             <50 ohms

•Distortion (FX off) :-             <0.075% (FX on and fully driven = > 18%)

•Dimensions H 4.31″ (109.6mm)/W 6.26” (159.2mm)/L 15.2” (386mm)

•Weight 8.25lbs (3.74Kg)