Here's a rare
chance to own a pair of pristine Levinson No. 436 Mono Amps for nearly
half of what they sold for originally. Reviews across the board for
these all conclude that they are without question among the best amps
there are out there. This set is low-hours, single owner, and pristine. Both amps work flawlessly.
These
will be professionally packed, fully insured, and shipped freight. We
have shipped many high-end mono amps successfully, so buy with
confidence. And of course, please feel free to contact me if you have
any questions!
Manufacturer Notes:
Description: Solid-state monoblock
power amplifier with one pair Madrigal speaker binding posts, one 3-pin
XLR balanced input, two 1/8" minijacks for remote turn-on, one RS-232
port on RJ-11, two Mark Levinson communication ports on RJ-45, and two
PHAST communications ports on RJ-45. Rated power output (20Hz-20kHz,
<0.3%. THD, FTC): 350Wpc into 8 ohms (25.4dBW), 700W minimum
continuous into 4 ohms (25.4dBW), 1400W minimum continuous RMS power at 2
ohms (25.4dBW). Frequency response: 20Hz-20kHz, ±0.2dB. Output
impedance: ±0.05 ohm, 20Hz-20kHz. S/N Ratio: better than -89dB (ref.
2.83V). Damping factor: >800, 20Hz-20kHz into 8 ohms. Power
consumption: 100W in standby, 180W at idle. Current draw at rated output
at 120V: 8.5A (350W into 8 ohms), 14.6A (700W into 4 ohms), 25.6A
(1400W into 2 ohms). Dimensions: 17.75" (455mm) W by 7.65" (194mm) H by 20.2" (518mm) D. Weight: 85 lbs (38.6kg) net, 95 lbs (43.2kg) shipping. Serial numbers of units reviewed: 1001, 1002. MSRP: $6250 each, $12,500/pair. Approximate number of dealers: 85. Manufacturer: Harman Specialty Group, 3 Oak Park, Bedford, MA 01730.