X- Wide 1-3/4" (45 mm) Birdseye Maple/Ebony Neck Tobacco Sunburst Solid Mahogany Strat + Working Bridge Tone+ Treble Bleed+7 Sound Switch+ Matte Black Guard + Grover 406C Locking Tuners+ Leveled, Crowned and Polished Frets+Low Action Setup!

X- Wide 1-3/4" (45 mm) Birdseye Maple/Ebony Neck Tobacco Sunburst Solid Mahogany Strat + Working Bridge Tone +7 Sound Switch+ Treble Bleed+ Matte Black Guard + Grover 406C Locking Tuners+ Leveled, Crowned and Polished Frets +Low Action Setup!

Solid Honduran Mahogany Sunburst Strat + Working Bridge Tone + Treble Bleed+ Fender American Professional Series single-coil pickups Added.

This configuration is designed for maximum versatility, offering thick humbucking tones alongside traditional "quack" in the combined positions.

• Versatility: Provides a mix of heavy humbucker sounds and standard single-coil tones, often used for rock, metal, and fusion.

Guitar Description:

Mahogany Sunburst Classic Strat + 12" Radius Birdseye Maple/Ebony Neck with lots of resonance. Completed by Haywire Custom Shop USA-South Carolina. SRV pickups on the bridge, middle and neck positions and Black Guard

Guitar Neck Description:

 Neck Profile-Standard Thin

• Similar to: Modern Fender® American Standard Strat® or Tele®
• Thickness at 1st Fret: .800"
• Thickness at 12th Fret: .850"
• Smooth Back Satin finish with soft comfortable feel
• No sharp fret ends from Haywire Custom Shop!

The Standard Thin Ebony/Maple Birdseye Maple is our most popular neck profile, very similar to modern Fender® necks. Its medium "C" shape will feel comfortable to most players.

Hardware:

This Mahogany Sunburst Classic Strat Includes all NEW: Hardware, Noiseless SRV Pickups
Aged Black Guard, New Jack, Knobs + New electronics, Neck plate and Strap Knobs and Screws included.
                     PLUS:

Treble bleed circuit installed + SRV Pickups, New tuners, strings and setup Included.

7 Way Switching includes-3 Single Coil and 2 Humbucking Modes.

Variable Treble Bleed Circuit included: keeps the tone you have on "10" throughout the entire range of the volume control circuit. Added to keep the highs from leaving your tone when the volume is decreased. By adding this circuit we can help you avoid the "muddy-tone" syndrome. Now your tone is much more controllable and articulate.

                                                   Haywire Custom Guitars Inc. USA-South Carolina                                            

7 Sound Switch Added Between the two Tones pots from the USA-Haywire Custom Shop 7 Sound                                                                                        

Switch Translation:

NORMAL Position 1 of the 5-way selector switch activates the bridge pickup alone by engaging the toggle switch at this point it will activate the neck pickup giving you the bridge and neck pickups together.

Likewise, with the 5-way selector switch in the second position with the bridge and middle pickups activated, a flick of the toggle switch adds the neck pickup to the equation which gives you ALL of the pickups together. Two choices now missing on a stock Strat.

Here's the switch run-down: Here's what you'll get after we added the 7 Sound Toggle Switch between the Tone Controls:

Position 1-Will give you tones and sounds reminiscent of the “Byrds” Rickenbacker tone.

Position 2-Will make all three pickups available at one time.
                                                               
5-way switch pickup selections Your 2 new selections:
position 1 Bridge pickup alone bridge + neck in parallel  
position 2 bridge + middle pickup in parallel all three pickups in parallel
position 3 middle pickup alone
position 4 middle + neck pickup in parallel
position 5 neck pickup alone
Engaging the toggle switch will add the neck pickup in any position of the 5 way slider switch

 We heard you. THIS GUITAR HAS A WORKING BRIDGE TONE CONTROL!

In 99% of Fender Stratocaster guitars the tone control doesn't work for the bridge-only pickup selection of the Stratocaster.

It works on a few, approximately 1% of Stratocaster guitars whether made by Fender or by Squier, or Affinity, Fender Japan, Fender Taiwan, Fender Mexico, American (circa 1991) or Fender China and more have no tone control on the bridge pickup. The tone controls do work for the other four switch positions.

                                                                                   Why?

                         It was just a design that was only meant to please the inventor, Mr. Leo Fender.

Leo wanted a pickup position that sounded similar to a steel guitar. So now in Fender guitars the bridge pickup selection has no tone control wired to it whatsoever and no one at Fender Corp. has seemed to notice. They have failed for years to hear what guitarists have been asking for.

Can we simply have a tone control on our bridge pickup?                                      
YES-Your Bridge tone control is now here.
From the Haywire Custom Guitars-Custom Shop

Why is the Treble Bleed Circuit included?

Turning the volume control applies varying amounts of a specially tuned high frequency filter to the pickups.
Now each pickup has the ability to produce a stronger, fuller tone and 50% less noise. This variable treble bleed circuit is pre-installed. The variable treble bleed/bypass circuit corrects the problem of high frequency losses common in Strats and Teles.
It provides auto-adjustment of tone at reduced volumes and improves audio taper between 3 and 10.
Now the tone is crisp, clear and articulate all the way down to 1.

                                                                                 Question?
                                                    With The Treble Bleed modification installed:
                                                                           How does it work?

Answer-It allows you to roll off your volume without losing the highs.
Would you like being able to use the volume control... without sacrificing tone?
Now You Can... with a Treble Bleed Circuit Mod added on this guitar!

As you turn your guitar's volume down, the pot allows some of the current to go to ground as opposed to the output.

The frequencies that leave first are the highs, which leave the tone muddy and obscured without an "edge" on it to a discerning ear.

               So....., you can now avoid this problem with the installed: Haywire Treble Bleed Circuit

          NOW......When you lower your guitar's Volume control take notice if you lose your tone's clarity. 

If your tone is now muddy & with too much bass, adding our Haywire Treble Bleed Circuit to your Volume Control Pot, your guitar will "Bleed" in more Treble as you turn your volume down.  Now you have much cleaner, articulate tones when rolling down the volume control.
 
This feature allows the treble frequencies to be re-introduced into the output for clarity and improved timbre and no loss of highs for you. At Haywire we simply install a TB Circuit capacitor. We build them in our custom guitars for a better Low and High sound spectrum:

1-error-correction of signals with enhanced clarity

2- preserve high end frequencies

3-improved taper when rolling back your volume control

Note: More about this Treble Bleed Circuit Mod on the Haywire Custom Guitars Website
Specifications:

• THIS Body routed for HSH configuration, which is able to accept universal pickup settings and various pick guard styles with different cutouts.
• The body underneath the pick guard is the part of the guitar that is routed. this body is routed for HSH configuration, and able to accept universal pickup choices and various pick guard styles with different cutouts. For example, if you want a S-S-H, or H-S-S, S-S-S, H-H and S-H configurations. The body rout already cut, will accommodate all of these configs. All that is necessary is to decide which pickup configuration, then add the pickups to a guard to accommodate the pickup selection YOU need. Then drop back into your guitar with 3 perfectly fitting pickup slots.
• (Haywire Custom Guitars offers custom guitars made to their customer's specifications. The guitars are made with upgraded components at a reasonable price. They also offer custom guitar neck replacements, installations and custom guitar neck contours.) "Building satisfied players one Haywire Custom guitar at a time!" Great Tone and Sustain with lots of resonance.
• Body Wood: Solid Mahogany

• Finish:  Sunburst
• Scale Length: 25-1/2" (648mm)
• Neck Pocket Size: 2-3/16" (55.55mm) Width x 3"(76.2mm) Length x 5/8"(15.88mm) Depth
• Neck Mounting Hole Dimension: standard 51mm x 38mm
• Neck mounting holes and wire path are drilled already.
• Routed for HSH pickup configuration, which is able to accept universal pickup settings.
• For Pick-Ups the ohms are: Special Bridge Pickup:
  DC Resistance: 9.10K - 9.23K Special Strat
  DC Resistance: 8.58K -8.33K Strat Neck Pickup:
  DC Resistance: 7.04K Middle Pickup   Buyers please note: All electronics and hardware including Pick guard, SRV Pickups, Tremolo bridge + 1Vol +2 Tone Controls, strap knobs, screws, input jack, all wiring and back plate have been added free of charge. Please replace electronics with your own parts if required. 
• Buyers please note: Haywire Custom Guitars offers custom guitars made to their customer's specifications if you have any questions, concerns or special requests then please ask before purchase. We are a Custom Shop featuring many custom options for players. Haywire guitars are made in South Carolina at a reasonable price just for players. We also offer custom guitar neck replacements, installations and custom guitar neck shaving. "Building satisfied players one Haywire Custom guitar at a time!" Great Tone and Sustain with lots of resonance.

Our electronics, pickguards and pilot holes are added free of charge on used bodies, however if you have any specific electronic requirements, please ask prior to purchase.

We have our own house brand SRV pickups, but we have access to anything our customers need. We want you to be happy so please let us know exactly what you want before buying.