Dynaudio AIR 20 + Subwoofer

SHIPPING NOT FREE - Please message before purchase so we can figure out shipping cost - otherwise I’ll have to refund the purchase

Dynaudio Air 20 studio monitor set + subwoofer

Mint condition - they have been taken excellent care of

Located in Denmark

10" woofer, 5.5" midrange and 1.1 soft dome tweeter

• 192 kHz support via dual wire
• The new 221 (two-to-one) design - integrating unique tweeter and mid-range technology
• Bass management, with selectable frequency crossover points
• Advanced bass management
• Acoustic placement compensation
• Preset storage and recall
• Programmable reference levels
• Level alignment in 0,1dB steps
• All monitors aligned within +/- 0.2dB precision
• Integrated parametric EQ’s and delay in each monitor (only accessible with PC-IP)
• Central and remote control of system and parameters
• Direct digital inputs and analog inputs (optional)
• Networking in-between all AIR components
• Dedicated AIR Base subwoofers
• Two times 200-watt amp package in each monitor

Specifications:

• System: three-way semiactive nearfield monitor
• Frequency response (+/- 3 dB): 31 Hz –22 kHz: +/- 3 dB
• Peak SPL 1m, pair (IEC short term): 131dB peak
• Peak SPL 2m, 5.1 (IEC short term): 129 dB peak
• Max SPL 1m, (IEC long term): 104 dB RMS
• Precision of monitor matching: +/- 0.2 dB
• Port tuning frequency: 40 Hz
• Internal cabinet volume: 35 liters
• Bass principle: bass reflex
• Crossover frequency: 390 Hz (DSP generated) and 2600 Hz
• Crossover slope: 12 dB/oct and 6 dB/oct
• Tweeter unit: esotar 28 mm / 1.1” soft dome, neodymium magnet, rear chamber,
• Midrange: 145 mm / 5,5", one-piece molded polypropylene cone, 38 mm /
• Woofer: 240 mm / 9,5", one-piece molded polypropylene cone, 100 mm /
• Mains voltage: 100 to 240 VAC, 50 to 60 Hz (auto-select)
• Power consumption: 45 W @ 1/8 max power (IEC 60065)
• Amp: black painted back plate
• Cabinet: black ash with dark gray MDF baffle
• Dimensions: 575 x 310 x 395 mm / 22,6” x 12,2” x 15,5”
• Depth incl. amp and driver: 28 kg / 62.2 lbs
• Tweeter, midrange and woofer: tweeter & midrange 200 W amp/woofer 200 W amp
• Typical listening distance: 1.5-3 m / 5-10.2 ft
• Typical room size: 80-130 m3 / 2800-4600 ft3
• Internal sample rate: 192 and 176.4 via dual wire (optional digital card required) and 96, 88.2, 64, 48, 44.1 or 32 kHz
• I/O connectors: XLR (2 channels AES/EBU in) 3 x RJ 45 proprietary TC Link
• Formats: AES/EBU (24 bit)
• Word clock input: BNC, 75ohm, 0.6-10 Vpp
• Display: 2 x 16 character dot matrix
• Operation: menu system / four buttons
• Input connectors: XLR balanced (pin 2+, pin 3-)
• Impedance: 10/3 k ohm (balanced/unbalanced)
• Selectable full scale input level: +9, +15, +21, +27 dBu
• Dynamic range: > 113 dB typ. (unweighted), BW: 20-20 kHz
• THD+N: < -105 dB typ. @ 1 kHz, -3 dBFS
• Crosstalk: < -120 dB, 20 Hz to 20 kHz
• A to D conversion: 24 bit (dual bit delta sigma sampling at 4.1/5.6/6.1/6.1 MHz)
• I/O Connectors: 2 x RJ45 proprietary TC-Link
• Complies with: EN 55103-1 and EN 55103-2, FCC part 15 class B, CISPR 22 class B
• Certified to: IEC 60065, EN 60065, UL 6500 and CSA E60065 CSA FILE #LR10809
• Operating temperature: 32° F to 122° F (0° C to 50° C)
• Storage temperature: -22° F to 167° F (-30° C to 70° C)
• Humidity: max. 90 % non-condensing