Pineville, NC, Estados Unidos
Información sobre este anuncio
Lewitt LCT 440 PURE: The First Studio Condenser That Does Not Need an Upgrade
The Lewitt LCT 440 PURE is a 1-inch true condenser cardioid studio microphone with a gold-sputtered Mylar diaphragm, class-leading 7 dB-A self-noise, 140 dB maximum SPL, and a flat 20 Hz - 20 kHz frequency response that gets out of the way of the source. It ships with the Lewitt DTP 40 Lb open-front shockmount, a magnetic pop filter that snaps directly to the shockmount, a foam windscreen, and a storage pouch — everything required to record cleanly from the moment the box opens. This is the microphone home recording engineers, podcasters, voiceover artists, and project studios buy as their first studio condenser and never need to replace.
Class-Leading 7 dB-A Self-Noise and 133 dB Dynamic Range
The LCT 440 PURE's class-leading 7 dB-A self-noise is the single specification most cited by buyers. That low noise floor captures whispered voiceover, room ambience between musical phrases, and quiet acoustic passages with audible silence between notes — not the hiss most studio condensers add. Combined with the 140 dB maximum SPL handling, the result is 133 dB of dynamic range (A) in a single take. The same microphone captures a whispered piano-and-vocal verse and an electric guitar cab in the chorus without pad activation, without distortion, and without changing the gain stage between takes.
Flat 20 Hz - 20 kHz Frequency Response — Neutral, Transparent Character
Many studio condensers are "characterful" — they color the source with a presence-band lift or a low-mid scoop that flatters one voice and disrespects another. The LCT 440 PURE is the opposite. The 20 Hz to 20 kHz frequency response is flat and neutral — the microphone captures the source as it is, leaving the EQ, compression, and processing decisions to the engineer. For a home studio that tracks vocals, acoustic guitars, drum overheads, voiceover, and ambient room mic in the same session, a neutral microphone outperforms a characterful one because one mic covers every source. For a project studio mixing other people's tracks, neutrality lets the engineer commit fewer choices in the recording stage.
Gold-Sputtered Mylar Diaphragm and 1-Inch True Condenser Capsule
The LCT 440 PURE's 1-inch true condenser capsule uses a gold-sputtered Mylar diaphragm — the gold layer ensures consistent capacitance across humidity and temperature variations, and the Mylar substrate is the long-life diaphragm material that resists deformation under repeated SPL events. The capsule is fixed-cardioid (not a multi-pattern design), and the polar pattern is exceptionally consistent off-axis — the rejection of room sound behind the mic stays uniform from low-mid to high-mid frequencies, so a vocalist who turns their head 30 degrees off the capsule does not produce a frequency-balance shift in the recorded take.
DTP 40 Lb Open-Front Shockmount and Magnetic Pop Filter Included
The included DTP 40 Lb open-front shockmount is the same shock-isolation design Lewitt ships with its higher-tier LCT mic models. The open-front design lets the engineer reach the microphone body without disassembling the mount — quick mic swap, tight clearance for boom arm positioning, and full visibility of the capsule for camera-front placement. The magnetic pop filter snaps directly to the front of the shockmount — no separate goose-neck arm cluttering the desk, no inconsistent placement between sessions. Slide the mic into the cradle, snap on the pop filter, route the XLR cable through the cable channel — the entire setup is repeatable to within a degree of position every time.
23.1 mV/Pa Sensitivity Drives Any Modern Audio Interface
The 23.1 mV/Pa sensitivity rating is comfortably within the gain range of every modern audio interface — entry-level Focusrite Scarlett Solo, mid-tier Focusrite Scarlett 4i4, Universal Audio Volt, and pro-tier interfaces all deliver clean gain to the LCT 440 PURE without needing an inline preamp. This is the spec that prevents the most common purchase regret in studio condensers — buying a microphone that needs more gain than the interface can supply. The LCT 440 PURE works on day one with the interface most home studios already own.
Who the LCT 440 PURE Is For
This is the studio condenser for the singer-songwriter recording vocals and acoustic guitar at home, for the podcaster wanting broadcast-grade voice for a permanent setup, for the voiceover artist who needs low self-noise to record without ambient hiss, for the project studio tracking band sessions with vocals + acoustic guitars + drum overheads in one mic locker, and for the streaming creator wanting a permanent broadcast condenser on a boom arm. The first-time studio condenser buyer gets a mic that does not need to be upgraded — the LCT 440 PURE will outlast multiple interface upgrades and remain the engineer's first reach for years. The upgrader from a USB condenser gets the noise floor and SPL handling of a flagship at a fraction of the price. Order yours today.
Precio original $269
$20 de rebaja
Precio nuevo $249
Envío gratis de 2 días
Política de devoluciones de 30 días
Disfruta de tu nuevo equipo sin preocupaciones




