Brian May Guitars / Brian May Special Red [BHM181631] [09/18]

Brian May Guitars, under the supervision of Brian May himself, has recreated the Red Special that he has used as his main guitar for over 30 years.
The mahogany chambered body and neck and ebony fingerboard give the guitar a warm and fat sound, and the original wired pickups are used to give it that unique tone.
The pickups are wired in series just like the original pickups, with each pickup turned on and off, and a slide switch for phasing provides a wide variety of detailed tones.

There are many fine line scratches on the pickguard and body back, but other than that, it is in good condition with only minor scratches and small dings.

After our arrival, cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing.

Item rank: B+ (Good)

Truss rod: There is enough room.
Fretboard : 60-70%.
Accessories EESoft case / Genuine arm
Weight EE3.91kg
Serial EEBHM181631

Truss Rod : No problem, confirmed up to 60 degrees on both sides of the rod
Fret height is sufficient.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|46.0mm
Neck thickness(near 1st fret)|22.9mm
Neck thickness (near 12th fret)|23.9mm
SCALE|610mm (24")
RADIUS|241mm (9.5")
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment, and mortise adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut Width
46.0mm

Neck Thickness (near 1st fret)
22.9mm

Neck Thickness (near 12th fret)
23.9mm

Scale
610mm (24")

RADIUS
241mm (9.5")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing

*** The shipping cost to most countries is included in the listed price ***

All musical instruments we sell have been checked and adjusted for playability. The pictures in the listings are of the actual item so please have a look for an idea of the cosmetic condition. As they are used instruments they may or may not have some scratches or wear to the finish. Please note: Ishibashi will not accept returns or refunds in the case of dents, scratches, or cosmetic wear that were originally detailed either in the pictures or description. Thank you for your understanding.

Condition: Some scratches, dents and marks. If you would like to know more about this specific instrument, or have general questions, please don't hesitate to contact us.

Accessories: Please confirm the picture.

Precautions for electronic instruments that use a power supply

The voltage in Japan is 100 V, it is different from most of other countries, you need confirm the voltage of your country and in some cases you have to get locally an adaptor for converting the voltage before use it in your country.

Please note!
All import duties, customs fees, and procedures are the buyer's responsibility - please be aware of the requirements for your country

We will check the condition of the items that we received order over before shipping it out. The usual wait time for our shipping is 7 to 10 days worldwide. We are open from Monday to Saturday 11:00am until 6:00pm (Tokyo time zone) 6 days a week, closed on Sunday.** Please note that all items for sale on here are also available at our retail stores in Japan. There is a chance that they may sell out in our retail location beforehand. We update our information daily, but there is still a chance this may occur. In this event we will cancel the order and refund any payments received. Thank you for your understanding.

More information please confirm our shop policy.