Paimon is a lower gain overdrive pedal that is designed for pushing your amp into crispy overdriven bliss. The three controls and two switches allow for a wide variety of dirt that makes it ideal for stacking as well as giving enough gain to be used as a standalone dirt pedal that has a character all its own. This pedal is built with Lumberg i/o and power jacks, Wima and Nichicon capacitors, Yageo metal film resistors, and a feather soft click footswitch wired for true bypass. Due to the nature of the hydro dipped enclosures each will have its own pattern. This pedal is designed for 9v center negative power supply only, no battery snap. Designed, assembled, drilled, painted, and wired by hand in Asheville, NC.

Volume – V – Total output volume.

Gain – G – Total gain saturation.

Tone – T – Typical hi cut to low cut tone control.

Clipping Mode Switch – right toggle switch - provides LED, silicon diode, or no clipping voice options. LED = up, No clipping = middle, Silicon diode = Down.

High Cut Mode Switch – left toggle switch - three-position high-frequency cut switch. Up = a little bit of hi cut, middle = no high frequency cut, down = lots of high cut.