Denon DRA-397 XM-ready AM/FM Stereo Receiver #2089 - USED

Product ID: DISTRIO-M-2089

DRA-397 AM/FM Stereo Receiver from Denon offers 80W of power per channel (at 8 ohms, 20 Hz - 20 kHz, 0.08% THD). The DRA-397 delivers solid, reliable audio performance even when driving both A and B speaker systems at the same time. The DRA-397 provides a pre out terminal that lets you connect another amp so that you can enjoy the same source in sub-room 1 that you have in the main room.

The DRA-397 AM/FM Stereo Receiver includes FM stations that can be searched by the tuner and automatically stored in the preset memory up to 56 stations. It allows you to select a video source, and then select an alternate audio input source, ideal for simulcasting, as well as watching TV sports programs while listening to radio commentary.

High-Quality Power Amplifier
With 80W of power per channel (at 8 ohms, 20 Hz - 20 kHz, 0.08% THD), the DRA-397 delivers solid, reliable audio performance even when driving both A and B speaker systems at the same time
Signal Level Divided Construction Chassis Design
The circuit handling low-level signals has been divided into separate blocks to ensure that influences from these signals on each other are held to an absolute minimum. This new chassis design, known as the Signal Level Divided Construction (SLDC), preserves the purity of the signal, allowing it to be reproduced with much greater fidelity and clarity

Pre Out Function
The DRA-397 provides a pre out terminal that lets you connect another amp so that you can enjoy the same source in sub-room 1 that you have in the main room. The versatile A-B speaker switching feature lets you listen to music in a second sub-room by simply selecting speaker system B. The volume from the pre out terminals is linked to the DRA-397's master volume control

Video Terminals
Stereo video sources, such as hi-fi VCR, stereo TV, and DVD, can all be easily connected to the DRA-397's DVD/VDP, VCR and Video Aux terminals

Video Select Function
Allows you to select a video source, and then select an alternate audio input source, ideal for simulcasting, as well as watching TV sports programs while listening to radio commentary

Auto Preset Memory
FM stations can be searched by the tuner, and automatically stored in the preset memory up to 56 stations, ideal for locales with many FM stations
Sophisticated Tuning Circuit Design
Thanks to the PLL circuit design, reception drift is a thing of the past. The DRA-397 also has a 4-pole varactor diode in its front end to guarantee accurate input of station frequencies

ASD-1R Control Dock for iPod
Supports iPod playback when connected to the DRA-397
Denon's original Control Dock for iPod (sold separately) is connected to the dedicated control terminal of the DRA-397. The iPod can also be controlled via the remote controller supplied with the DRA-397

XM Mini-Tuner Ready
Optional XM Mini-Tuner and subscription are required

Additional Features

• Pure direct mode, for the pure enjoyment of music in high-quality sound
• Fast up/down manual tuning
• Manual step tuning
• Last-channel-tuned memory
• Loudness function
• Tone defeat
• Muting function via remote controller
• A/B speaker switching
• Last function memory
• Room-to-room remote control with remote in/out terminals
• Subwoofer output
• Switching AC outlets

Amplifier Surround RMS Power 80W + 80W (8 ohms, 20 Hz - 20 kHz, 0.08% THD) Freq. Response (Rec/Repro) 10 Hz - 100 kHz +0 dB, -3 dB (at 1W) Input Sensitivity Phono: 2.5mV/47 kohms
CD, CD-R/Tape, DVD/VDP, VCR, V.Aux.: 200mV/47 kohms Output Level Zone2, Zone3: 1.2V/47 kohms Deviation RIAA: +/- 0.5 dB (20 Hz - 20 kHz) THD 0.009% (-3 dB at rated output, 1 kHz) Tone Control Treble: ±10 dB at 10 kHz
Bass: ±10 dB at 100 Hz FM Tuning frequency range: 87.5 - 107.9 MHz
Usable sensitivity: 1.0 μV (11.2 dBf)
S/N ratio (A-weighted) Mono: 77 dB, Stereo: 73 dB
Total harmonic distortion Mono: 0.15%, Stereo: 0.3%
Frequency response: 20 Hz - 15 kHz, +0.5, -1.5 dB
Stereo separation: 43 dB (1 kHz) AM Frequency Range Tuning frequency range: 520 - 1710 kHz
Usable sensitivity 18 μV Power Supply AC 120 V, 60 Hz Power Consumption 3.4 A Remote Control RC-1052
Batteries: R6P/AA Type (two batteries)
Dimensions: 2 x 9.6 x 1" (52 x 243 x 21mm)
Weight: 6.2 oz (175 g)
RC-1056
Batteries: R03/AAA Type (two batteries)
Dimensions: 2 x 4.5 x 1" (54 x 115 x 23mm)
Weight: 2.8 oz (80 g) Dimensions (WxHxD) 17.1 x 5.8 x 16.4" (434 x 147 x 417mm) Weight 20.7 lb (9.4kg) Packaging Info Package Weight 25.4 lb Box Dimensions (LxWxH) 20.75 x 20 x 9.2"