Santa Fe Springs, CA, États-Unis
À propos de cette annonce
Column Line Array The CBT 50LA-1, with Constant Beamwidth Technology, represents a breakthrough in pattern control, utilizing analog delay beam-forming and amplitude tapering to accomplish consistent vertical coverage without the narrow vertical beaming and out-of-coverage lobing that are typical of straight form-factor passive column speakers. Key Features Patent-pending Constant Beamwidth Technology provides constant directivity up to the highest frequencies and reduces out-of-coverage lobing. Switchable voicing provides flat response in music mode or mid-range presence peak in speech mode. Dynamic SonicGuard overload protection Built-in 70V/100V transformer, plus 8 ohm direct capability. Swivel (pan) / tilt wall bracket included. Technical specs Components Eight 50 mm (2 in) Full-Range Frequency Range (-10 dB) 80 Hz - 20 kHz Coverage Pattern Vertical 20° (1.5 kHz - 16 kHz, ±10°) Horizontal 150° (ave, 1 kHz - 4 kHz, ±20°) Sensitivity (2.83V@ 1m) 93 dB (speech mode, 2 kHz - 14 kHz) 89 dB (music mode, 300 Hz - 18 kHz) Nominal Impedance 8 ohms Power Capacity (8 ohm setting) 150W (600W peak), 2 hrs 100 W (400W peak), 100 hrs Max SPL Speech mode: 115 dB cont ave (121 peak) Music mode: 111 dB cont ave (117 peak) 70V/100V Transformer Taps 60W, 30W, 15W, (7.5W at 70V only), and 8 thru, via switch Enclosure Fiberglass reinforced ABS cabinet, painted aluminum grille Outdoor Capability IP-54 rated, per IEC529. UV, moisture and salt-spray resistant Colors Black Insert Points Ten M6 insert points on back panel. Mounting Included swivel (pan) / tilt wall bracket provides continuously variable +/-80 degree left-right swivel aiming (at no up/down tilt -- see Bracket Guide for maximum swivel range at various up/down tilt angles), continuously adjustable ±15 degree tilt, as well as 5 degree fixed increment points within the range. Ten threaded mounting points located on back panel conform to industry standard rectangular 108 x 51 mm (4.25 x 2.0 in) pattern for OmniMount® 30.0 and other compatible third-party brackets. Threaded mounting points can be utilized for suspension. Dimensions (H x W x D) 528 x 99 x 153 mm (20.8 x 3.9 x 6.0 in) Net Weight 4.1 kg (9.0 lb) Included Accessories Swivel (pan) / tilt wall bracket Optional Accessories MTC-PC2 terminal panel cover MTC-CBT-FM1 flush-mount low-profile wall-mount bracket MTC-CBT-SMB1 Stand-Mount Bracket for use with 35 mm speaker stand.
Prix$585
Expédition gratuite
Expédition gratuite
depuis Santa Fe Springs, CA
Plus qu’un exemplaire
Ne le laissez pas passer
Politique de retour de 14 jours
Profitez de votre nouveau matériel en toute sérénité
