Audio-Technica 200 Series Freeway Wireless Microphone System w/ ATM70 Headset Microphone, ATW-T201 Bodypack Transmitter #2189 - USED

Audio-Technica’s Freeway 200 Series Wireless System provides proven performance in a variety of settings. Each 200 Series professional VHF wireless system includes a receiver and either a body-pack transmitter or a handheld microphone/transmitter on a specific crystal-controlled frequency. The ATW-R200 receiver design features an innovative docking power supply configuration. An AC power adapter housed in a compartment in the receiver uses an IEC-standard detachable power cordset. Furthering its flexibility, the power adapter may be easily removed from the receiver case, permitting its use as a conventional in-line AC adapter. A novel dipole antenna system on the receiver improves operation by providing a ground element in addition to the usual signal element.

• Advanced dipole antenna system
• Available in three traveling frequencies
• Removable docking power supply inserts into back of receiver
• Adjustable squelch control
• ATW-T201 UniPak® transmitter includes variable microphone/guitar trim control

The ATM75 offers the comfort and performance well beyond what one would even expect from Audio-Technica. So super lightweight (only 60 grams) you'll forget its there and it won't interfere with your performance in the least. Combine this with the ATM75's Cardioid polar pattern, wide frequency range, low frequency roll-off switch and crystal clear reproduction and it looks like - you just found what you're looking for!

• Professional quality vocal pickup with hands free operation
• Low visibility headband provides stable, comfortable fit
• Pivot mounted flexible mic boom descends from left or right side
• Belt mounted power module operates on battery or phantom power
• 55" (1.4 m) cable permanently attached between microphone and power module

Body Pack RF Power Output 10 mW High position, 2 mW Low position, typical Battery Life Approximately 15 hours in High position;
Approximately 20 hours in Low position
(depending on battery type and use pattern) Battery Type 9V (NEDA type 1604) alkaline, not included Current Consumption 30 mA typical Dimensions 2.56" (65.0 mm) W x
4.33" (110.0 mm) H x
1.00" (25.4 mm) D Input Connections High impedance, low impedance, bias Net Weight 2.8 oz (78 g) Spurious Emissions Under federal regulations Dynamic Range >=90 dB, A-weighted Receiver Receiving System Non-diversity, single-channel, dual antenna system Image Rejection 50 dB minimum Sensitivity 20 dBµV for 60 dB S/N (IEC-weighted) Power Supply 120V AC 60 Hz, 6 VA; or 12V DC, 200 mA, center positive, with external DC supply Operating Temperature Range 40° F (4° C) to 110° F (43° C) Dimensions 8.27" (210.0 mm) W x
1.72" (43.5 mm) H x
4.73" (120.0 mm) D Weight 18.9 oz (536 g); without AC adapter, 11.9 oz (336 g) Accessories Included AD1202A 120V docking AC adapter; 120V AC IEC cordset Total Harmonic Distortion <=1% (10 kHz deviation at 1 kHz) Audio Output 350 mV (1 kHz modulation, 10 kHz deviation, 100 k ohm load) Output Connector 1/4" TS ("mono") phone jack Overall System Operating Frequencies VHF high band, 169 MHz to 172 MHz Modulation Mode FM Maximum Deviation ±15 kHz Frequency Response 80 Hz to 13 kHz Frequency Stability ±0.005% Operating Range 200' minimum Operating Temperature Range 40° F (4° C) to 110° F (43° C) Number Of Channels Fixed channel