Doepfer A-140-2V Dual Mini ADSR (Vintage Edition)
PriceA$275
+ A$71.93 Shipping
Only 1 left
Grab it before it's gone
Listed:over a month ago
Views:281
Watchers:14
Burbank, CA, United States
30-Day Return Policy
Enjoy peace of mind with your new gear
Only 1 left
Grab it before it's gone
30-Day Return Policy
Enjoy peace of mind with your new gear
Module A-140-2 contains two ADSR type envelope generators behind a front panel with 8 HP only.Each ADSR provides these controls and in/outputs:
By means of internal jumpers one can select which time parameters are controlled by the CVT input (e.g. D only or D+R or A+D+R) and in which direction (i.e. if an increasing CVT shortens or stretches the time parameter in question).Socket CVT can be normalled to an internal fixed voltage (i.e. the switching contact is connected to an internal fixed voltage). That way it's possible to change all time parameters simultaneously by means of the CVT control.Another jumper is used to set output 2 to normal or inverted envelope.And another jumper is used for the normalling of Gate 2 to Gate 1 (i.e. ADSR#2 is also triggered by Gate 1).Two more jumpers are used for the optional bus access to the gate signal of the bus for each ADSR.Changing the positions of the mentioned jumpers allows to modify the factory settings.
Condition | |
Brand | |
Model |
|
Categories | |
Horizontal Pitch |
|
Synth Module Function |
|
Modular Synth Format |
|
Module A-140-2 contains two ADSR type envelope generators behind a front panel with 8 HP only.Each ADSR provides these controls and in/outputs:
By means of internal jumpers one can select which time parameters are controlled by the CVT input (e.g. D only or D+R or A+D+R) and in which direction (i.e. if an increasing CVT shortens or stretches the time parameter in question).Socket CVT can be normalled to an internal fixed voltage (i.e. the switching contact is connected to an internal fixed voltage). That way it's possible to change all time parameters simultaneously by means of the CVT control.Another jumper is used to set output 2 to normal or inverted envelope.And another jumper is used for the normalling of Gate 2 to Gate 1 (i.e. ADSR#2 is also triggered by Gate 1).Two more jumpers are used for the optional bus access to the gate signal of the bus for each ADSR.Changing the positions of the mentioned jumpers allows to modify the factory settings.
Condition | |
Brand | |
Model |
|
Categories | |
Horizontal Pitch |
|
Synth Module Function |
|
Modular Synth Format |
|
Your purchases help youth music programs get the gear they need to make music.
Your purchases also help protect forests, including trees traditionally used to make instruments.