Cornell - Explorer 10 Amp Head

+ $684.98AUD Shipping
This seller is open to offers

14-Day Return Policy

Enjoy peace of mind with your new gear

Shipped From
Art of Guitar
Dubai, United Arab Emirates
Joined Reverb
Reverb Protection

Buy with Confidence – Reverb Protection has you covered

  • Live support from an expert team of musicians
  • Simple and straightforward returns
  • A safe community for finding the gear you want

About This Listing

Take it from the top

A small, deceptively versatile tone monster that makes a great recording tool, the Explorer 10 is an exceptional amplifier. Don\'t let the modern looks, the blue LEDs and all that jazz distract from the fact that this is an old-school, single-ended class A valve amplifier. It is a lunchbox-style class A valve amplifier that\'s housed in a typically rugged grey steel case, with perforated cover and smart gold handle trims. It\'s a stylish little amp, and reassuringly heavy, too, with over-sized mains and output transformers under the hood. The electronics are hand-soldered onto a substantial circuit board, 4.8mm thick, that\'s arranged with printed tracks with turret and eyelet-style wiring – much like you might see in 1950s American amplifiers. You\'ll find the base for the Explorer\'s sole 6L6 power valve housed on the main board, with the two 12 preamp valve bases mounted on the chassis with hand-wired links. As you might expect by now, the components are of the highest order, and audio geeks will be sent to their happy place upon witnessing the primo carbon comp resistors and flawless wiring. The Explorer 10\'s setup is simple. It has a single-channel preamp with volume, gain and tone rotary controls. There’s a Clean/Mean switch that adds a respectable mid-boost, and a four-way attenuator switch to control the Explorer 10’s output power from 10 watts down to a measly 1/8 watt. It also broadens your single coil tone. On the rear of the amp you\'ll find a pair of speaker outputs and an impedance switch with a choice of four- or eight-ohm loads, so you won\'t be lacking in cabinet options. Upon switching the amp on you are greeted with four blue LEDs lighting up the preamp valves. There is no standby; a smart thermistor solution delays the full current en route to the mains transformer until said thermistor has warmed up. Although the Explorer 10 is a simple amplifier, there is plenty of variety on offer here. There\'s no shortage of brightness, but none of those ice-pick tones to set your teeth – and playing – on edge. Whether you are noodling some Montgomery lines on the LP\'s neck pickup or playing sharp, compressed country on the Strat, the Explorer\'s cleans are incredibly musical.

About Cornell

Denis Cornell is one of the most revered names in British guitar amplification. He was among those responsible for Sound City amplifiers and the Fuzz Face, back when he was making his bones at Arbiter. He counts the likes of Eric Clapton and Noel Gallagher as his fans, and anyone who is familiar with his work can attest to the super-tough build quality and attention to detail.

Rotary Wattage Select Switch

Whether you\'re in the studio or playing at home, the wattage selection allows you to choose how powerful you want the amp to be. This means you can select a lower wattage and drive the amp harder however the overall volume being much lower - making it more suitable for home use!Here are the available wattages:A - 10 wattsB - 2.5 wattsC - 0.25 wattD - 0.08 watt

Loudspeaker Outlets & Impedance Switch

On the back of the head, there’s a pair of loudspeaker outlets and an impedance switch with a choice of four- or eight-ohm loads, for easy connection to a wide range of cabinets.

Robust Construction To Last A Lifetime

There’s no standby switch, but the Explorer 10 uses a clever thermistor arrangement to delay full current being applied to the mains transformer for a few seconds until the thermistor has warmed up. Overall, the Cornell is built to the kind of standard only a few manufacturers can match and should last a lifetime.LEDs also light up the preamp valves when you switch on. CLEAN & MEAN SWITCHThe Explorer 10 has a simple single-channel preamp with volume, gain and tone rotary controls. There’s a switch called Clean/Mean, which adds a respectable midboost. it acts as a hefty boost to the mids – just the thing when you need a little more punch.


  • Channels: 1 Switchable power: 10 / 1.5 / 0.25 / 0.05 Watts
  • Preamp tubes: 2 x ECC83
  • Power amp tubes: 6L6
  • Controls: Gain, tone, volume
  • Switch: Clean & Mean
  • Speaker outputs: 8.4 Ohms
  • Hi & Lo input: 2x 6.3 mm jack
  • Speaker output: 2x 6.3 mm jack
  • Dimensions (W x D x H): 340 x 180 x 150 mm
  • Weight: 7 kg

Key Features

Valves include 2 x ECC83, and 1 x 6L6 Cornell 4 way Attenuation going from 10 watts, 2.5 watts, 0.25 watts & 0.08 watts. Clean & Mean switch between clean and gain.

Handmade and Hand wired by Cornell Team in their Workshop in Essex England.

Reviews of this Shop


Product Specs

ConditionBrand New (New)
Brand New items are sold by an authorized dealer or original builder and include all original packaging.learn more
Made In
  • United Kingdom

Reverb Gives

Your purchases help youth music programs get the gear they need to make music.

Carbon-Offset Shipping

Your purchases also help protect forests, including trees traditionally used to make instruments.

iOS app store button
Android play store button
The Apple logo and the App Store are trademarks of Apple Inc. Google Play and the Google Play logo are trademarks of Google LLC.
Oops, looks like you forgot something. Please check the fields highlighted in red.