Vintage 1970s McIntosh Mac 4100 AM-FM Stereo Receiver 75-100W Wood Panel
Great shape! Awesome Receiver. Very clean. The receiver works perfectly and all features still work just like new! Some chips in the wood panel. As you can see. The "tape copy" and "speaker select" push pull buttons caps are broken off/chipped but works as is. Please examine pictures.You can just stick your finger or pencil in there to set it and its fine. Perhaps those can be ordered or found on ebay. Minor scuffs and chips. Prices reflects condition. Everything works as it should.
SPECIFICATIONS
POWER OUTPUT: 100 watts minimum sine wave continuous average power output, per channel, both channels operating into 4 ohms 20 Hz to 20 kHz, with no more than 0.05% THD 75 watts minimum sine wave continuous average power output, per channel, both channels operating into 8 ohms 20 Hz to 20 kHz, with no more than 0.05% THD. OUTPUT LOAD IMPEDANCE: 4 ohms, 8 ohms RATED POWER BAND: 20 Hz to 20 kHz TOTAL HARMONIC DISTORTION: 0.05% maximum at any power level from 250 milliwatts to rated power per channel, 20 Hz to 20,000 Hz, both channels operating FREQUENCY RESPONSE: 20 Hz to 20 kHz + 0, -0.5 dB at rated power INTERMODULATION DISTORTION: 0.05% maximum at any power level from 250 milliwatts to rated power per channel both channels operating for any combination of frequencies 20 Hz to20,000 Hz NOISE AND HUM: Power Amplifier : 100 dB IHFA, 95 dB unweighted, below rated output. Tape and Aux Input : 95 dB IHFA, 90 dB unweighted below rated output. Phono Input : 90 dB IHFA, 80 dB unweighted, below 10 mV input DAMPING FACTOR: Greater than 30 INPUT SENSITIVITY AND IMPEDANCE: Power Amplifier : 2.5 volts, 22,000 ohms; Tape, Auxiliary : 250 millivolts, 100,000 ohms; Phono: 2 millivolts, 47,000 ohms, 87 pF TAPE OUTPUT LEVEL: Tuner : 1.0 volts at 100% modulation [FM]; Tape : 250 millivolts with rated input; Phono : 250 millivolts with rated input PROGRAM EQUALIZER: ±12 dB at 30, 150, 500, 1500, and 10,000 Hz FM SECTION SENSITIVITY: 2mV [11.2dBF] IHF minimum SIGNAL TO NOISE RATIO: 70dB IHF minimum HARMONIC DISTORTION: Mono: 0.18% IHF (maximum); Stereo: 0.38% IHF (maximum) FREQUENCY RESPONSE: 20 Hz to 15 kHz, +0, -1 dB CAPTURE RATIO: 1.8 dB SELECTIVITY: 75 dB IHF minimum SPURIOUS REJECTION: 90 dB IHF minimum IMAGE REJECTION: 80 dB IHF minimum STEREO SEPARATION: 45 dB minimum at 1 kHz SCA REJECTION: 60 dB minimum AM SECTION SENSITIVITY: 75 mV IHF [External antenna] SIGNAL TO NOISE RATIO: 45 dB minimum IHF, 55 dB at 100% modulation HARMONIC DISTORTION: 0.8% maximum at 30% modulation FREQUENCY RESPONSE: 6 dB down at 3500 Hz ADJACENT CHANNEL SELECTIVITY: 30 dB minimum IHF IMAGE REJECTION: 65 dB minimum, 540 kHz to 1600 kHz GENERAL INFORMATION SEMICONDUCTOR COMPLEMENT: 45 Transistors, 31 Integrated Circuits, 62 Diodes, 1 Silicon Controlled Rectifier POWER REQUIREMENTS: 120 Volts, 50/60 Hz, 0.6 to 4 amperes (72 to 480 watts) MECHANICAL INFORMATION DIMENSIONS (W x H x D): IN CABINET: 473 x 165 x 394 mm (18-5/8 x 6-1/2 x 15-1/2 inches) WITHOUT CABINET: Front panel measures 446 x 133 mm (17-9/16 x 5-1/4 inches) Chassis measures 435 x 125 x 343 mm (17-1/8 x 4-15/16 x 13-1/2 inches) Knob and handle clearance required is 32 mm (1-1/4 inches) in front of the mounting surface. FINISH: Front panel is clear anodized to produce a brushed satin/silver finish with black trim. Cabinet is walnut grained vinyl WEIGHT: 19 kg (42 pounds) net, 25,4 kg (56 pounds) in shipping carton
Shipping, Payment & Important Details. Your item will be shipped immediately after I receive payment. I use parcel post on most items. If you need it ASAP, please contact after the sale to make arrangements. If there is problem, please contact me before leaving feedback. I will do my best to work out any issues.
International Buyers – Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying
